CUSTOM HOMES · SPEC HOMES · ADUS · MULTI-UNIT
Custom Home Builder in Southwest Florida
Custom, spec, luxury, waterfront and multi-unit homes built on your lot, from design and permits to the final walkthrough.
New Homes Built Around Your Lot and Your Life
DiBe Development & Construction builds new homes across Southwest Florida, with a strong focus on Cape Coral and Lehigh Acres, plus Fort Myers, Estero, Naples and the surrounding area. We build for homeowners, families, retirees and investors, on lots they already own or lots we help them find.
Every home is built with concrete block construction, engineered trusses, impact-rated openings and roofing designed for Florida wind loads. We manage design, engineering, permits, site work and construction under one contract with a detailed budget and real schedule.
What Our Custom Home Services Include
We build nearly every type of new residential project.
Custom & Luxury Homes
Homes designed around your lot, lifestyle and budget.
- Custom single-family homes
- Luxury home construction
- Vacation homes
- Multigenerational homes
- Aging-in-place homes with accessible design
Waterfront & Coastal Homes
Homes engineered for flood zones, wind and water access.
- Waterfront home construction
- Elevated coastal homes
- Stilt homes on pilings
Spec, Production & Investor Homes
Repeatable plans and predictable budgets for builders and investors.
- Spec homes for resale
- Production homes for multiple similar lots
- Small-footprint homes
- Build-to-rent homes
ADUs & Guest Houses
Extra living space for family, guests or rental income where zoning allows.
- Detached accessory dwelling units
- Attached accessory dwelling units
- Guest houses
Multi-Unit Residential
Small multifamily housing for investors and owner-occupants.
- Duplex construction
- Triplex construction
- Fourplex construction
- Townhouse construction
Replacement & Infill Homes
New homes on existing neighborhood lots.
- Replacement homes following demolition
- Residential infill construction
Building in Florida Flood Zones
Many Southwest Florida lots sit in FEMA flood zones that set a minimum elevation for new homes. Depending on the lot and zone, that can mean fill and a raised slab, stem walls or a fully elevated home on pilings. Coastal high-hazard areas require additional engineering. We evaluate elevation requirements during lot review so your design and budget reflect them from the start, and we provide the elevation certificates needed for permits and insurance.
Choosing the Right Home Type
Not every lot or budget fits every home. A duplex or ADU can add rental income, a multigenerational layout can bring family together, and an elevated home can open up waterfront lots in high flood zones. We help you compare options based on zoning, lot size, cost and long-term goals before design begins, so the home you build is the right fit for years to come.
What Is Included in Our Homes
Every home we build includes a full design and permitting package, site preparation and fill where needed, a foundation set to the required elevation, concrete block walls with reinforced tie beams, engineered roof trusses with hurricane connections, impact-rated windows and doors, roofing rated for Florida wind loads, energy-efficient HVAC, modern electrical and plumbing systems, and interior finishes chosen with you during the selection process.
Popular upgrades include pools and spas, covered lanais and outdoor kitchens, three-car garages, upgraded kitchen and bath packages, whole-home generators, solar-ready wiring and smart-home systems. We price every upgrade clearly so you can decide where to invest.
Building for Investors
Investors build new homes in Southwest Florida for resale, long-term rental and short-term rental. Spec homes, build-to-rent portfolios and small multi-unit projects all benefit from standardized plans, efficient layouts and volume pricing. We help investors pick plans that match the target buyer or renter, keep construction costs predictable and coordinate several lots at once, with reporting that lenders and partners can rely on.
Who We Serve
Homeowners
Families building a primary home on their lot.
Retirees & Relocators
Out-of-state buyers building a Florida home remotely.
Investors
Spec, build-to-rent and multi-unit projects with predictable budgets.
Landowners
Lot owners who want to know what can be built.
Families
Multigenerational and in-law-friendly homes.
Realtors & Lenders
A reliable builder to refer clients to.
Our Custom Home Process
01. Lot Review
Zoning, setbacks, flood zone, utilities and site conditions.
02. Design & Plans
Floor plan selection or custom design with engineering.
03. Budget
Detailed, line-item budget before permitting.
04. Permitting
Surveys, environmental checks and permit submission.
05. Construction
Site work, block, roof, MEP and finishes with weekly updates.
06. Move-In
Inspections, walkthrough, punch list and certificate of occupancy.
Hurricane-Code Homes Built to Last
Every home we build is designed for Florida’s climate: reinforced concrete block walls, engineered roof-to-wall connections, impact-rated windows and doors, roofing rated for local wind speeds and HVAC and insulation detailed for heat and humidity. These details protect your family and your investment and can help with insurance.
Why Choose DiBe Development & Construction
- Licensed Florida general contractor
- One contract for design, permits and construction
- Line-item budgets with no hidden site costs
- Hurricane-code block construction
- Experience with waterfront, flood-zone and elevated homes
- Weekly photo updates for out-of-state owners
How to Request an Estimate
Getting started on your custom home project is simple. Here is what to expect when you reach out to our team.
1. Contact Us
Call (239) 414-3423 or use our contact form to tell us about your custom home project, location and timeline.
2. Site Visit & Review
We review your plans, photos or property in person, discuss goals and scope, and answer your questions.
3. Detailed Estimate
You receive a clear, written estimate with scope, line-item pricing, allowances and an expected schedule.
4. Schedule & Build
Once approved, we handle permits, order materials, schedule trades and keep you updated through completion.
Related Services
Home Additions & Conversions
Room additions, second stories, in-law suites and garage conversions.
Outdoor Living & Lanais
Lanais, decks, pergolas, outdoor kitchens, pool decks and pavers.
Demolition & Site Work
Full and selective demolition, lot clearing, grading, fill and drainage.
Structural Repairs, Concrete & Masonry
Foundations, slabs, framing, beams, block walls and structural repairs.
Kitchen Remodeling
Layout changes, cabinets, countertops, islands and pantries.
Preconstruction & Construction Management
Estimating, scheduling, permitting, owner’s rep and project management.
See our full list of construction services or browse every page on our sitemap.
Service Areas
We provide custom home services throughout Southwest Florida, including Fort Myers, Cape Coral, Lehigh Acres, Naples, Estero, Bonita Springs and Punta Gorda, and in Southeast Florida, including Miami, Fort Lauderdale and West Palm Beach. Visit our service areas page for details.
New Residential Construction Services
Building a new home involves dozens of coordinated scopes. As the licensed general contractor, DiBe manages the full sequence, with plumbing, electrical, HVAC, roofing and pool work performed by licensed trade contractors that we coordinate.
- Custom home construction
- Single-family home construction
- Multifamily residential construction
- Duplex construction
- Triplex construction
- Fourplex construction
- Townhouse construction
- Luxury estate construction
- Waterfront home construction
- Coastal home construction
- Elevated home construction
- Stilt home construction
- Modular home installation and construction
- Prefabricated home construction
- 3D-printed home construction
- Concrete block home construction
- Insulated concrete form (ICF) home construction
- Structural insulated panel (SIP) home construction
- Accessory dwelling unit (ADU) construction
- Guesthouse construction
How Does Building a Custom Home Work Step by Step?
Most custom home projects follow the same broad path, whether the home is a modest single-story plan or a large waterfront residence. Knowing the sequence helps you plan financing, decisions and timing.
1. Lot review
We look at the lot’s flood zone, elevation, soil, utilities, setbacks, easements and any deed restrictions or HOA rules. In some areas that means confirming city water and sewer; in others, a well and septic system will be needed.
2. Design and budget
You work with a designer or architect, or start from an existing plan, while we build a budget alongside the design so the home fits the number you want to spend.
3. Engineering and permits
Structural engineering addresses Florida wind loads, and the permit package is submitted to the local building department. Flood zone lots may require elevation certificates and specific construction details.
4. Site work and foundation
The lot is cleared and filled as needed, utilities are brought in, and the foundation and slab are poured after inspection.
5. Structure and dry-in
Block walls, tie beams, roof framing and trusses, roofing, windows and doors are installed to get the home dried in.
6. Rough-ins
Plumbing, electrical, HVAC and low-voltage rough-ins are completed by licensed trades under our MEP coordination, followed by inspections.
7. Finishes
Insulation, drywall, cabinets, countertops, tile, flooring, trim and paint are installed through our interior finishes process.
8. Final inspections and move-in
Final inspections, punch list, cleaning and a walkthrough lead to the certificate of occupancy and your move-in.
How Much Does It Cost to Build a Custom Home in Southwest Florida?
Custom home cost depends on choices you make and conditions on the lot. Rather than quoting a generic figure that may not apply to you, we estimate each home from its plans, specifications and site. These are the factors that move the price most.
- Home size, shape and number of stories
- Lot conditions: fill, elevation, soil and drainage
- Flood zone requirements and finished floor elevation
- Utilities: city water and sewer vs well and septic
- Waterfront features such as seawalls and docks, coordinated separately
- Roof type: shingle, metal or tile
- Window and door package, including impact-rated openings
- Ceiling heights, architectural details and structural spans
- Kitchen, bath and interior finish selections
- Pools, outdoor kitchens and covered lanais
Custom Home Planning Checklist
Use this checklist as you move from idea to contract.
- Confirm the lot’s flood zone and required elevation
- Check for HOA or deed restrictions on size, style and materials
- Confirm water, sewer or well and septic requirements
- Get pre-approved for a construction loan if financing
- Set a total budget including lot work, permits and contingency
- Choose or develop a floor plan that fits the lot
- Decide on roof, window and exterior finish types early
- Plan the pool and outdoor living areas with the house
- Make major finish selections before construction begins
- Review the contract, allowances and change order process
Related Services for New Homes
Many homeowners pair a new home with a pool and outdoor living space; see our pool construction and outdoor living pages, where pool work is performed by licensed pool contractors that we coordinate. Owners in specific markets can review new home construction in Cape Coral and new home construction in Lehigh Acres. Larger or more complex lots may need dedicated site development. If you already have a builder’s proposal and want an independent review, our construction consulting service can help you understand what is and is not included.
How Long Does It Take to Build a New Home in Florida?
A new home schedule has two parts: pre-construction (design, engineering and permitting) and construction. Pre-construction time depends on how quickly the plan is finalized and how busy the local building department is. Construction time depends on home size and complexity, weather, inspection scheduling and material lead times.
Decisions are one of the biggest factors you control. Homes where the owner finalizes the plan, exterior materials and major finishes before construction begins tend to move more smoothly than homes where selections are made late. Florida’s summer rains and hurricane season can also affect site work and roofing, so we prioritize getting the home dried in.
What can cause delays
Late design changes, back-ordered windows or specialty finishes, failed inspections, utility connection timing and extended stretches of severe weather are the most common causes.
What Should I Look for in a Custom Home Builder?
Choosing a builder is a long relationship, often a year or more from first meeting to move-in. These questions help you compare builders on the things that matter.
- Is the builder a licensed Florida contractor, and is the license active?
- Does the builder carry general liability and workers’ compensation coverage?
- Is the estimate detailed, with clear inclusions, exclusions and allowances?
- How are change orders priced and approved?
- Who will manage the job day to day, and how often will you get updates?
- How does the builder handle hurricane preparation during construction?
- What warranty is provided, and how are warranty requests handled?
- Can you visit homes the builder has completed or is building now?
Building on Canal, Waterfront and Flood-Zone Lots
Waterfront living is a major draw in Southwest Florida, especially along the canals of Cape Coral and coastal areas near Fort Myers Beach, Naples and Punta Gorda. These lots come with added considerations: FEMA flood zone requirements, required finished floor elevations, seawall condition, soil and fill needs, and exposure to wind and salt air.
Depending on the flood zone, a home may be built on an elevated slab or on a raised foundation with breakaway walls or flood vents below. Corrosion-resistant fasteners, durable exterior finishes and careful water management help a coastal home hold up over time. Seawalls and docks are specialty work that is coordinated separately with appropriately licensed marine contractors.
Inland and Rural Homesites
Larger lots in areas such as Golden Gate Estates, Lehigh Acres and Alva and Buckingham offer space and privacy but often need more site preparation. Clearing, fill, driveway length, wells, septic systems and longer utility runs all factor into the budget. We evaluate those items before design so the plan and the budget match the land.
How Do Construction Loans Work for a New Home?
Many custom homes are financed with a construction loan rather than a traditional mortgage. Instead of paying the full amount at closing, the lender releases funds in stages, called draws, as construction milestones are completed and verified, often by an inspector working for the lender.
Common milestones include foundation, block walls and tie beams, dry-in, rough-ins, drywall and final completion. Some loans convert to a permanent mortgage when the home is finished, while others require separate closings. Your lender will usually ask for the builder’s contract, plans, specifications, budget and license and insurance information. We provide those documents and coordinate draw requests with the lender’s schedule so construction is not slowed waiting on funds.
Talk to a lender early
Construction loan requirements differ by lender, including down payment, contingency and how lot equity is treated. Speaking with a lender before you finalize plans helps keep the design aligned with your financing.
Energy Efficiency and Comfort in a Florida Home
Florida homes spend much of the year cooling, so efficiency choices pay off over time. Properly sized HVAC equipment, sealed ductwork inside the conditioned envelope where practical, good attic insulation, low-emissivity impact glass, light-colored or reflective roofing and careful air sealing all help control energy use and humidity. Dehumidification, ventilation and moisture-resistant materials matter just as much as cooling capacity in a humid climate. We review these options during design so you can weigh upfront cost against long-term comfort and operating cost.
Should I Build New or Renovate an Existing Home?
Some homeowners weigh building new against buying and renovating an existing house. Building new gives you a current-code structure, a layout designed around how you live, and new systems throughout. Renovating can make sense when you love a location, the structure is sound and the needed changes are limited.
Older homes in flood zones may face limits on how much can be spent on improvements before the home must be brought into compliance with current flood requirements, which can change the math significantly. If you are considering a renovation instead, see our home remodeling and home additions pages, or ask for a side-by-side comparison.
What Happens at the Final Walkthrough?
Before move-in, we walk the completed home with you to review finishes, operate doors, windows, fixtures and appliances, and note any punch list items. Once those are addressed and final inspections pass, you receive the certificate of occupancy, warranty information, equipment manuals and maintenance guidance for systems such as HVAC filters, irrigation and impact openings.
Explore Related Pages
- New Home Construction in Southwest Florida: ground-up homes built on your lot across Southwest Florida
Custom Home FAQs
Can you build on my lot?
Yes. We review your lot, confirm what can be built and handle design, permits and construction.
Do you build ADUs and guest houses?
Yes, where local zoning allows. We build attached and detached ADUs and guest houses.
Do you build duplexes and townhomes?
Yes. We build duplexes, triplexes, fourplexes and townhomes for investors and owner-occupants.
Can you build an elevated home in a flood zone?
Yes. We build elevated homes on stem walls, raised slabs or pilings to meet FEMA and local requirements.
Do you build in Cape Coral and Lehigh Acres?
Yes. See our Cape Coral and Lehigh Acres new home pages.
Can you demolish an old home and build a new one?
Yes. We handle demolition, site preparation and construction of the replacement home.
Can I build a custom home on a lot I already own?
Yes. We start with a lot review covering flood zone, elevation, utilities, setbacks and restrictions, then develop a plan and budget that fits the site.
Do I need a well and septic system?
It depends on the lot. Some areas have city water and sewer, while others, including parts of Cape Coral, Lehigh Acres and rural areas, may require a well and septic system.
Can DiBe build my pool along with the house?
Yes. We coordinate pool construction with licensed pool contractors so the pool, deck and lanai are planned and built together with the home.
How long does it take to build a custom home?
It depends on the home’s size and complexity, permitting time, weather and how quickly selections are made. We provide a project-specific schedule once plans are finalized.
How do construction draws work?
The lender releases funds in stages as construction milestones are completed and verified, rather than paying the full loan amount at the start.
Ready to Build Your New Home?
Tell us about your project and our team will follow up to discuss scope, budget and schedule. Estimates are clear, detailed and tailored to your property.