Plumbing · Electrical · HVAC · Florida
Plumbing, Electrical & HVAC Coordination
Mechanical, electrical and plumbing systems planned, permitted and installed by licensed trade contractors and coordinated by one general contractor, for homes, additions, remodels and commercial spaces.
The Systems That Make a Building Work
Plumbing, electrical and HVAC systems, often grouped together as MEP, are the hidden infrastructure of every building. They account for a significant share of construction cost, require separate licenses and permits, and must fit inside walls, floors and ceilings that other trades are building at the same time. When MEP coordination is weak, the results show up as clashes, failed inspections, change orders, poor comfort and high operating costs.
DiBe Development and Construction coordinates MEP work on our new construction, remodeling, addition and tenant improvement projects. The work itself is performed by licensed plumbing, electrical and mechanical contractors, as Florida law requires. Our role is to plan the systems with the design team, schedule the trades, prepare the building for rough-in, coordinate inspections and verify the finished systems are complete and working. For plumbing, we work with trusted partners including HomeFlow Plumbing.
Good MEP coordination starts in preconstruction. Equipment sizes, panel capacities, water heater types, duct routes and fixture selections all affect framing, structure, ceilings and finishes, so we address them before construction starts rather than in the field.
Plumbing, Electrical and HVAC Services We Coordinate
Performed by licensed trade contractors and coordinated by our team:
- New construction plumbing coordination
- Residential plumbing system installation management
- Commercial plumbing construction management
- Water supply line installation coordination
- Drainage pipe installation coordination
- Sewer line installation coordination
- Underground plumbing installation management
- Water heater installation coordination
- Tankless water heater installation coordination
- Bathroom plumbing renovation management
- Kitchen plumbing renovation management
- Whole-house repiping coordination
- Commercial restroom plumbing coordination
- Plumbing fixture installation coordination
- Backflow prevention installation coordination
- Water filtration system installation coordination
- Gas piping installation coordination
- Septic system installation coordination
- Lift station construction coordination
- Utility service connection coordination
Plumbing for New Construction and Remodels
Plumbing work begins underground with sewer, drain and water lines set before the slab is poured, continues with rough-in inside the walls after framing, and finishes with fixtures, water heaters and appliances at the end of the project. Each stage is inspected, and underground and rough-in plumbing are pressure or water tested before they are covered.
On remodels, plumbing often drives the design. Moving a sink, shower or toilet requires new drain lines with proper slope and venting, which may mean cutting slabs on grade in Florida homes. Older homes may have polybutylene, galvanized or cast iron piping that should be replaced during the remodel. Our licensed plumbing partners, including HomeFlow Plumbing, evaluate existing systems and recommend upgrades.
Electrical Systems and Service Upgrades
Modern homes and businesses use far more electricity than buildings designed a few decades ago. Kitchens with induction cooking, EV chargers, pool equipment, home offices, heat pumps and whole-home generators can quickly exceed the capacity of an older service. Our licensed electrical partners perform load calculations, upgrade panels and services where needed and coordinate with the utility for meter and service changes.
Electrical design also shapes how a space feels. Lighting layouts, switch locations, outlet placement, under-cabinet and accent lighting, exterior lighting, data and security wiring are all decided during design and verified at rough-in. In Florida, surge protection and generator readiness are increasingly common requests.
HVAC Design for the Florida Climate
Air conditioning in Southwest Florida is about humidity control as much as temperature. A system that is oversized for the space cools quickly but shuts off before it removes enough moisture, leaving rooms clammy and inviting mold. Proper HVAC design starts with a load calculation based on the building’s size, insulation, windows, orientation and occupancy, followed by equipment selection and duct design to deliver the right airflow to each room.
Ductwork is often the weak link. Leaky, crushed or poorly sized ducts in hot attics waste energy and reduce comfort. Florida energy code requires duct leakage testing on new systems, and sealing and insulating ducts properly makes a measurable difference. Ductless mini-splits are excellent for additions, garages converted to living space and rooms that existing systems cannot serve.
Commercial MEP Coordination
Commercial buildings and tenant improvements bring larger and more complex systems: rooftop units and split systems, exhaust for restrooms and kitchens, grease interceptors, backflow prevention, fire alarm interfaces, emergency lighting, larger electrical services and distribution, and data infrastructure. Space above ceilings is limited, and ducts, sprinkler piping, conduit, plumbing and structural members must all fit.
We coordinate MEP drawings with the architect and engineers, review submittals, organize above-ceiling coordination before installation and schedule inspections so ceilings can close on time. For medical and dental suites, we coordinate medical gas, specialized plumbing and dedicated electrical with the equipment vendors and licensed contractors.
Who We Serve
New home clients
Complete MEP systems planned with your custom home.
Remodeling clients
Relocated plumbing, new circuits and HVAC for remodels and additions.
Commercial tenants
MEP coordination for offices, medical, retail and restaurant build-outs.
Property owners
System upgrades, replacements and storm-resilience improvements.
Our Process
01. Design coordination
Systems sized and laid out with the design team.
02. Permits
Separate plumbing, electrical and mechanical permits obtained by licensed trades.
03. Underground and rough-in
Systems installed in sequence and inspected before cover.
04. Coordination checks
Clashes resolved before walls and ceilings close.
05. Trim and start-up
Fixtures, devices and equipment installed and tested.
06. Final inspections
Approvals, documentation and owner orientation.
Consulting Before You Build
Not ready to start construction? DiBe Development & Construction also offers construction consulting: feasibility reviews, budgets, plan and bid reviews, schedules and owner’s representation. Many clients start with a consultation to understand scope, cost and risk before committing to a full project.
Related Services
Custom Home Builder
New homes with fully coordinated systems.
Tenant Improvements
Commercial interiors with MEP coordination.
Kitchen Remodeling
Plumbing, electrical and ventilation for kitchens.
Bathroom Remodeling
Relocated plumbing and new fixtures.
Home Additions
Extending systems to new living space.
Pools & Spas
Pool electrical, gas and equipment coordination.
See all construction services, our service areas and the full site map.
Service Areas
We provide plumbing, electrical and HVAC coordination services throughout Southwest Florida, including Fort Myers, Cape Coral, Lehigh Acres, Naples, Estero and Bonita Springs, and Southeast Florida, including Miami, Fort Lauderdale and West Palm Beach.
How MEP Coordination Prevents Costly Problems
Most MEP problems on construction projects are coordination problems, not workmanship problems. A duct that cannot fit because a beam is in the way, a toilet drain that lands on a floor truss, a light fixture centered on a sprinkler head, an electrical panel placed where the code does not allow clearance, or a water heater with no room for service access all start as missed details on paper. Each one costs time and money to fix in the field.
Our coordination process catches these issues before they are built. During preconstruction we review the drawings for conflicts between structure, MEP and architectural elements, confirm equipment sizes and locations, and verify that chases, soffits and ceiling spaces are large enough. Before rough-in begins we walk the framing with each trade to confirm routes, fixture locations and blocking. Before walls close we verify inspections are passed and that everything shown on the plans is in place.
On commercial projects we lead above-ceiling coordination meetings with the mechanical, electrical, plumbing and fire protection contractors to agree on elevations and routes. Larger pipes and ducts get priority, gravity-drained plumbing is protected, and access is preserved for equipment that needs service. The result is a cleaner ceiling, fewer change orders and a building that is easier to maintain.
- Drawing review for clashes and clearances
- Equipment size and location verification
- Chases, soffits and ceiling space planning
- Pre-rough-in walkthroughs with each trade
- Above-ceiling coordination on commercial work
- Inspection tracking before cover-up
Storm Resilience for Building Systems
Hurricanes and flooding test building systems. Elevating air conditioning condensers, water heaters, electrical panels and generators above expected flood levels, using flood-resistant materials and wiring methods in lower areas and installing backflow prevention on sewer lines can reduce damage and speed recovery. Many Southwest Florida jurisdictions have specific requirements for equipment elevation in flood zones.
Standby generators are one of the most requested upgrades after major storms. A whole-home or whole-building generator requires proper sizing, a fuel source such as natural gas or propane, an automatic transfer switch, a code-compliant location with required clearances and permits. Surge protection at the panel helps protect electronics from power fluctuations during and after storms. We coordinate these upgrades with licensed contractors as stand-alone projects or as part of renovations and storm damage reconstruction.
Energy Efficiency and Operating Costs
MEP systems determine a large share of a building’s operating cost. High-efficiency heat pumps and air conditioners, properly sealed and insulated ductwork, smart thermostats, heat pump or tankless water heaters, LED lighting with occupancy controls and efficient pool equipment can significantly reduce utility bills. In commercial buildings, energy management systems, economizers and demand-controlled ventilation add further savings.
Florida’s energy code sets minimum requirements, but owners often benefit from exceeding them, especially on buildings they plan to own for many years. During preconstruction we help compare equipment options using both installed cost and expected operating cost, so decisions are based on total cost of ownership rather than first cost alone.
Indoor Air Quality and Ventilation
Modern buildings are built tighter to save energy, which makes mechanical ventilation more important. Bathroom and kitchen exhaust fans must be properly sized and vented to the exterior, not into attics. Fresh air ventilation strategies, dehumidification and good filtration help manage humidity, odors and allergens. In Florida, controlling humidity is the single most important step in preventing mold.
For commercial spaces, ventilation rates are set by code based on occupancy, and restaurants, salons, medical suites and fitness centers have additional exhaust and air quality requirements. We coordinate these systems with the mechanical engineer and licensed contractors so spaces are comfortable, healthy and compliant.
Plumbing Upgrades for Older Florida Homes
Many Southwest Florida homes built in the 1970s through the 1990s have plumbing that is reaching the end of its service life. Polybutylene supply piping, galvanized steel lines and cast iron drains under slabs are common sources of leaks and backups. A repipe replaces the supply lines throughout the home, while drain problems may require camera inspection and slab repairs or rerouting.
When planning a remodel, it is often cost effective to address aging plumbing at the same time, since walls and floors are already open. Our licensed plumbing partners, including HomeFlow Plumbing, can evaluate your system and recommend repairs or replacement. Whole-home water filtration and softening systems are also popular in many parts of Southwest Florida.
One Team for Every System
Coordinating three or more licensed trades, multiple permits and a series of inspections is one of the most demanding parts of any construction project. DiBe Development and Construction takes on that coordination so owners do not have to. Our construction consulting service can also review MEP scopes and proposals for owners who are comparing bids or planning a capital upgrade. Call (239) 414-3423 to discuss your project in Fort Myers, Cape Coral, Naples, Lehigh Acres or along the South Florida coast.
MEP for Additions and Garage Conversions
Extending systems into new space is one of the most important planning steps in an addition. The existing air conditioning system may not have the capacity to serve additional square footage, and adding ducts to an undersized system reduces comfort throughout the house. Options include upsizing the existing system, adding a separate system for the addition or installing a ductless mini-split. A load calculation guides the decision.
Electrical service capacity must be checked before adding circuits for new rooms, kitchens or bathrooms. New plumbing for an addition may tie into existing drains, require a new connection to the sewer or septic system, or, in septic areas, trigger a review of whether the existing system can handle the added bedrooms. We identify these questions early in our home additions process so they are reflected in the budget and permit plans.
Kitchen and Bathroom Systems
Kitchens and bathrooms concentrate MEP work into small spaces. A modern kitchen may need dedicated circuits for the refrigerator, dishwasher, disposal, microwave and range, ground-fault protection near sinks, a properly sized range hood vented to the exterior, gas or induction cooking connections, an ice maker line and under-cabinet lighting. Islands with sinks or cooktops require careful planning for drains, vents and power.
Bathrooms need proper exhaust ventilation, ground-fault protection, adequate water pressure and hot water delivery for large showers and soaking tubs, and drains sized for curbless showers or linear drains. Tankless or larger water heaters are common upgrades when bathroom fixtures are expanded. See our kitchen remodeling and bathroom remodeling pages for more on these projects.
- Dedicated appliance circuits
- Ground-fault and arc-fault protection
- Exterior-vented range hoods and bath fans
- Gas or induction cooking connections
- Island drains, vents and power
- Water heaters sized for new fixtures
Permits, Inspections and Documentation
Each trade typically requires its own permit, pulled by the licensed contractor performing the work. Inspections follow a predictable pattern: underground plumbing and electrical before the slab, rough-in inspections before insulation and drywall, and final inspections once fixtures, devices and equipment are installed. HVAC systems may also require duct leakage testing and energy code documentation.
We track every permit and inspection on the project schedule and coordinate re-inspections if corrections are required. At closeout we provide equipment model and serial numbers, warranties, panel schedules and maintenance information so owners have what they need to operate and maintain their systems.
Smart Home, Low-Voltage and Technology Wiring
Technology is now a core building system. Structured wiring for internet and Wi-Fi access points, security cameras, smart locks and doorbells, audio and video, motorized shades and lighting control all need planning before drywall. A central equipment location with power, ventilation and conduit pathways makes future upgrades far easier. Running empty conduit to key locations is an inexpensive way to prepare for technology that does not exist yet.
In commercial spaces, data cabling, access control, security systems, paging and audiovisual equipment are coordinated with the tenant’s IT provider, the electrical contractor and the ceiling layout. We schedule low-voltage rough-in alongside electrical and verify that pathways, backboxes and power are in place before ceilings close.
EV Charging for Homes and Businesses
Electric vehicle charging has become a common request for both new construction and renovations. A Level 2 home charger typically requires a dedicated circuit, and depending on the existing panel, a service or panel upgrade. Garage layout, charger location and future second-vehicle needs should be considered. For multifamily and commercial properties, EV charging involves load management, utility coordination, accessible spaces and in some cases networked chargers with payment systems.
Our licensed electrical partners evaluate capacity and install chargers to code, and we coordinate any concrete, trenching or bollard work needed at parking areas.
Restaurant and Medical MEP Requirements
Restaurants have some of the most demanding MEP requirements of any commercial space. Commercial kitchen hoods need exhaust and makeup air systems and fire suppression, grease interceptors are required on drains serving food preparation, gas service must be sized for cooking equipment, and walk-in coolers need dedicated electrical and condensate drainage. Health department approval is required in addition to building permits.
Medical and dental offices often need dedicated circuits and isolated grounds for equipment, vacuum and compressed air systems, medical gas coordinated with certified installers, specialized plumbing for sterilization areas, and enhanced ventilation. Imaging rooms may need shielding and dedicated power. We coordinate these requirements with equipment vendors, engineers and licensed contractors through our tenant improvements process.
Planning System Replacements
Air conditioning equipment, water heaters and electrical panels all have finite service lives. Replacing them on a plan rather than in an emergency gives owners time to compare options, improve efficiency and coordinate the work with other projects. For commercial properties and associations, a capital plan that tracks the age and condition of rooftop units, water heaters, pumps and electrical gear helps avoid unexpected failures during peak season. We can help evaluate existing systems and coordinate replacements with licensed contractors at a time that minimizes disruption to occupants.
Talk to Our Team
Whether you are building new, remodeling, adding space or upgrading aging systems, tell us what you are planning and we will help coordinate the right licensed trades, permits and schedule.
Service Areas
We coordinate plumbing, electrical and HVAC work across Lee, Collier and Charlotte counties and on projects along Florida’s southeast coast.
Electrical and Lighting Construction Coordination
Electrical work is performed by licensed electrical contractors and coordinated by our team as the general contractor. Services we coordinate include:
- New construction electrical installation management
- Residential electrical renovation coordination
- Commercial electrical construction coordination
- Electrical panel upgrade coordination
- Electrical service upgrade coordination
- Interior lighting installation coordination
- Exterior lighting installation coordination
- Recessed lighting installation coordination
- Landscape lighting installation coordination
- Parking lot lighting installation coordination
- Emergency lighting installation coordination
- Generator installation coordination
- Whole-house generator project management
- EV charging station installation coordination
- Solar panel installation coordination
- Smart home wiring coordination
- Low-voltage wiring coordination
- Security system wiring coordination
- Fire alarm installation coordination
- Electrical system modernization management
HVAC and Mechanical Construction Coordination
HVAC and mechanical work is performed by licensed mechanical contractors and coordinated by our team. Services we coordinate include:
- New construction HVAC coordination
- Residential air conditioning installation management
- Commercial HVAC installation management
- HVAC system replacement coordination
- Air duct installation coordination
- Air duct replacement coordination
- Ductless mini-split installation coordination
- Heat pump installation coordination
- Rooftop HVAC unit installation coordination
- Commercial ventilation installation coordination
- Kitchen exhaust hood installation coordination
- Bathroom exhaust ventilation coordination
- Whole-house ventilation system coordination
- HVAC zoning system installation coordination
- Smart thermostat installation coordination
- HVAC equipment relocation management
- Mechanical room construction
- HVAC system energy-efficiency upgrades
- Indoor air quality system installation coordination
- Building mechanical system modernization
Plumbing, Electrical & HVAC FAQs
Do you perform plumbing, electrical and HVAC work yourselves?
These trades are performed by licensed plumbing, electrical and mechanical contractors, as Florida requires. We coordinate design, scheduling, permits and inspections as the general contractor.
Who do you use for plumbing?
We work with trusted licensed plumbing partners, including HomeFlow Plumbing, depending on the project.
Do I need a panel upgrade?
If you are adding major loads such as an EV charger, pool equipment, induction cooking or a large addition, a licensed electrician will perform a load calculation to determine whether an upgrade is needed.
Why does my AC feel humid?
Oversized equipment, duct problems or improper airflow often cause poor humidity control. A load calculation and duct evaluation can identify the cause.
Can you install a whole-home generator?
Yes. We coordinate generator sizing, gas or fuel supply, electrical transfer switches and permits with licensed contractors.
Do you coordinate MEP for commercial build-outs?
Yes. We coordinate drawings, submittals, above-ceiling layout, inspections and start-up for offices, medical suites, retail and restaurants.
Do you help with generator and storm-resilience upgrades?
Yes. We coordinate generator sizing, fuel supply, transfer switches, surge protection and elevated equipment with licensed contractors.
Can you install EV chargers at a commercial property?
Yes. We coordinate load evaluation, utility service, trenching, accessible spaces and charger installation with licensed electrical contractors.
Plan Your Building Systems
Tell us about your project and our team will follow up to discuss scope, budget and schedule.