OUR WORK
Construction Portfolio & Project Experience
The types of commercial and residential projects we build across Southwest and Southeast Florida.
Project Experience
DiBe Development & Construction builds across a wide range of commercial and residential project types. Below is an overview of the work we take on, organized by category. To see examples relevant to your project, including photos, scopes and references, contact our team and tell us what you are planning.
Commercial Construction
Ground-up commercial buildings for owners, developers and businesses.
- Retail and restaurant buildings
- Office and medical buildings
- Warehouse, flex and self-storage
- Mixed-use and shell buildings
Tenant Improvements
Interior build-outs that get businesses open on schedule.
- Restaurant and café build-outs
- Retail and franchise locations
- Medical and dental suites
- Office and salon build-outs
Multifamily & Community
Renovation programs and amenities for apartments, condos and HOAs.
- Unit renovations and turns
- Clubhouses and amenity spaces
- Façades, balconies and walkways
New Homes
Custom, spec and investor homes in Cape Coral, Lehigh Acres and beyond.
- Custom and luxury homes
- Waterfront and elevated homes
- Spec and build-to-rent homes
- ADUs, duplexes and townhomes
Kitchens, Baths & Remodeling
Renovations that modernize how a home looks and works.
- Whole-home renovations
- Kitchen remodels
- Bathroom remodels
- Additions and conversions
Structure, Site & Exterior
The work that starts every project and protects every building.
- Demolition and site work
- Foundations and concrete
- Structural repairs and masonry
- Impact windows and exteriors
Request Examples for Your Project Type
Every project is different. Tell us what you are planning and we will share relevant examples, describe our approach and connect you with references where available. We are happy to walk you through how a similar project was scoped, scheduled and delivered.
What Types of Commercial Projects Do We Build?
Our commercial work covers the building types that make up most of Florida’s business landscape. Each type has its own priorities: a medical office needs careful coordination of plumbing, electrical and air handling; a restaurant depends on kitchen equipment, grease and exhaust planning; a warehouse is driven by slab, clear height and loading. Understanding those priorities is what allows a general contractor to price and schedule accurately. Details on scope and process are on our commercial construction page.
Retail and shopping centers
Freestanding retail buildings, in-line shops and shell buildings prepared for tenant build-out, with storefronts, site work and parking coordinated with civil design.
Office buildings and professional suites
Single- and multi-tenant office buildings and suites, where ceiling coordination, lighting, data infrastructure and accessible restrooms are central.
Medical and healthcare offices
Exam rooms, procedure spaces and support areas that require close MEP coordination with licensed mechanical, electrical and plumbing contractors, plus infection-control-friendly finishes.
Restaurants and hospitality
Dining rooms, commercial kitchens, bars and outdoor seating, with hood, grease interceptor and equipment coordination handled by licensed trades.
Industrial, warehouse and flex space
Tilt-wall, block or pre-engineered buildings with heavy slabs, loading areas and office components, often paired with site development work.
Multifamily and mixed-use
Apartments, townhomes and buildings combining ground-floor commercial with residential above. See multifamily construction.
Tenant improvements
First- and second-generation interior build-outs for landlords and tenants on lease-driven schedules, described on our tenant improvements page.
Renovation and restoration
Envelope, structural and interior renewal for aging buildings through our building restoration service.
What Types of Residential Projects Do We Build?
Residential projects follow the same structured process as our commercial work, adapted for homeowners who are often living in the home during construction or building the home they plan to live in for years.
Custom and new homes
Homes built on the owner’s lot through our custom home builder service, including new homes in Cape Coral and Lehigh Acres.
Additions and conversions
Bedroom and suite additions, second stories, garages and lanai or garage conversions through our home additions service.
Kitchens and bathrooms
Layout changes, cabinetry, countertops, tile, showers and accessible baths through kitchen remodeling and bathroom remodeling.
Whole-home remodels
Multi-room renovations, wall removals with engineered beams and system upgrades through home remodeling.
Outdoor living and pools
Lanais, summer kitchens, decks and pools, with pool and enclosure work performed by licensed specialty contractors. See outdoor living and pool construction.
Storm reconstruction
Rebuilding after hurricane, flood or fire damage through our storm damage reconstruction service.
What Structural and Trade Work Is Part of Our Projects?
Behind every finished space is structural and trade work that owners rarely see once the job is done. These scopes are available on their own or as part of a larger project.
- Foundations, slabs and block walls through structural concrete and masonry
- Driveways, patios and decorative flatwork through our concrete contractor service
- Wood and light-gauge framing and finish carpentry through framing and carpentry
- Drywall, paint, flooring, tile and millwork through interior finishes
- Selective and full demolition through demolition and site work
- Roofing, impact windows and doors through roofing and exterior services, with roofing by licensed roofing contractors
What Should You Look For in a Contractor’s Portfolio?
A portfolio is one of the most common ways owners evaluate contractors, but photos alone tell only part of the story. Finished spaces photograph well regardless of what is behind the walls, and a gallery cannot show whether the project finished on budget, whether inspections passed the first time or how the contractor handled problems. The best way to use a portfolio is as a starting point for deeper questions.
When reviewing any contractor’s past work, including ours, focus on relevance and verifiability. Has the contractor built projects similar in type, size and complexity to yours? Were those projects in comparable conditions, such as coastal flood zones or occupied buildings? Can the contractor explain what was challenging about each one and how it was resolved? Answers to those questions reveal far more than a photo.
- Projects similar to yours in building type and scale
- Work in similar conditions, such as flood zones, coastal exposure or occupied buildings
- Evidence of permitted work and passed inspections
- Construction-phase photos, not only finished photos
- Clear explanation of the contractor’s role versus subcontractors and designers
- Consistency of finish quality across different projects
- Willingness to discuss problems and how they were solved
- Ability to provide references you can contact directly
Which Questions Should You Ask About Past Projects?
Asking specific questions about past work helps you separate a polished presentation from a dependable builder. Good contractors are comfortable with these questions and answer them directly.
What was the original scope and how did it change?
Scope changes are normal. How the contractor documented and priced them, and whether the owner approved them in advance, tells you how your own project will be managed.
How did the schedule compare to the plan?
Delays happen for many reasons, including weather, permitting and material availability. What matters is whether the contractor anticipated risks and communicated changes early.
What did the inspections involve?
On Florida projects, inspections cover foundations, framing, wind-resistance connections, systems and final occupancy. Ask how the contractor prepares for them.
How were the trades coordinated?
Plumbing, electrical, HVAC, roofing and other licensed trades need to work in sequence. Ask who managed that coordination and how conflicts were resolved.
What happened at closeout?
Ask about punch lists, warranties, closeout documents and how post-completion questions were handled.
How Do We Share Relevant Project Experience?
Rather than present a generic gallery, we prefer to discuss experience that matches your project. When you contact us, tell us the building type, size, location and timeline. We will describe the kinds of similar work we have handled, explain how we would approach yours, and, where clients have agreed, share photos, references or other information relevant to your decision.
If you are comparing several contractors and want a neutral perspective on their proposals and experience, our construction consulting service can help you evaluate bids, scopes and schedules side by side. You can also learn more about how we work or view the full range of services we offer.
How Does Our Construction Process Work on Every Project?
Every project we build follows a consistent process. The level of detail scales with the size of the job, but the steps are the same whether we are building a commercial shell, a tenant interior or a home addition. A consistent process is what turns a set of drawings into a predictable result.
Step 1: Goals, site and feasibility
We start by understanding what the owner needs and reviewing the property: access, existing conditions, flood zone, utilities and any constraints that could affect design or cost. For early-stage owners, this can be a consulting engagement on its own.
Step 2: Preconstruction and budgeting
We review drawings for constructability, gather subcontractor pricing, identify long-lead items and suggest alternatives where they make sense. Our preconstruction page covers this phase in detail.
Step 3: Permitting
We submit permit applications, coordinate responses to plan-review comments with the design team and confirm approvals before work begins.
Step 4: Site preparation and structure
Demolition, clearing, grading, foundations, slabs and structural framing or masonry establish the building’s backbone. This is where elevation, wind design and drainage details are built in.
Step 5: Envelope and systems
Roofing, windows, doors and exterior finishes dry in the building while licensed trades install mechanical, electrical and plumbing systems under our coordination.
Step 6: Finishes, inspections and closeout
Interior finishes, fixtures and equipment go in, final inspections are completed, punch-list items are resolved and the owner receives warranties and closeout documents.
What Quality Standards Apply to Our Work?
Quality is not a final inspection; it is a series of checks built into every phase. Our superintendents review work before it is covered by the next trade, verify installations against the drawings and manufacturer requirements, and prepare for inspections so problems are corrected before an inspector finds them.
In Florida, certain details deserve extra attention because they determine how a building performs over decades of heat, humidity and storms. The list below reflects the checks we treat as essential on every project.
- Foundation and slab elevations verified against plans and flood requirements
- Reinforcing, anchor bolts and tie-downs checked before concrete placement
- Truss and rafter connectors installed to the engineered design
- Window and door installations flashed and sealed per manufacturer instructions
- Roof underlayment and flashing inspected before final roofing
- Penetrations sealed against water and pests
- Systems rough-ins coordinated to avoid conflicts before drywall
- Moisture-resistant materials used in wet areas and below design flood elevation
- Finish work protected from damage by later trades
- Punch-list completed and documented before handover
How Do Florida Conditions Show Up in the Finished Work?
Projects in Southwest and Southeast Florida must hold up to conditions that buildings elsewhere rarely face. Hurricane winds, storm surge, heavy summer rainfall, intense sun and salt air all shape the details. In a finished project, that shows up as impact-rated windows and doors, continuous load paths from roof to foundation, elevated floors in flood zones, corrosion-resistant fasteners and metals near the coast, and finishes that resist moisture and fading.
Those details are rarely visible in a portfolio photo, which is why we encourage owners to ask how a contractor handles them. When you speak with us about your project in Fort Myers, Cape Coral, Naples or Miami, we will walk through how each of these conditions applies to your building.
What Drives the Cost and Schedule of a Project?
Owners looking at past projects often want to know what a similar project would cost or how long it would take. Because every site, design and jurisdiction is different, we do not publish prices or standard timelines. What we can explain are the factors that drive both, so you can see why two projects that look alike in photos may differ significantly in budget and duration.
Design completeness
Projects that start with complete, coordinated drawings are easier to price accurately and less likely to need changes during construction. Incomplete designs rely on allowances that may move.
Site and elevation
Fill, drainage, soil conditions, utility connections and flood elevation requirements can add substantial work before the building itself begins.
Structure and wind design
Engineered connections, reinforced masonry, truss systems and impact-rated openings are required for Florida’s wind conditions and affect both cost and lead times.
Building systems
Medical offices, restaurants and multifamily buildings carry more complex mechanical, electrical and plumbing scopes than a simple shell or office suite.
Finish level
Material selections for flooring, cabinetry, fixtures and exterior finishes are among the biggest variables in both residential and commercial work.
Permitting and approvals
Plan review, zoning, association approvals and inspections add time that must be built into the schedule.
Occupancy and access
Work in occupied homes or operating businesses often requires phasing, after-hours work or extra protection, which affects duration.
How Can You Prepare for Your Own Project?
The more information you bring to the first conversation, the faster we can give you useful guidance. You do not need everything on this list, but each item helps.
- Property address and a survey if available
- Any existing drawings, permits or inspection reports
- Photos of the existing site or space
- A description of what you want to build or change
- Your target timeline and any fixed deadlines
- A general budget range or financing constraints
- Association, landlord or lease requirements
- Insurance claim information if the work is storm-related
Where Do We Build?
We build throughout Southwest Florida, including Estero, Bonita Springs, Lehigh Acres, Punta Gorda and Sarasota, and we build commercial projects on the southeast coast in markets such as Fort Lauderdale and West Palm Beach. See every community on our service areas page, or contact us to discuss your project.
What Makes a Project Successful Beyond the Photos?
A successful project is one the owner would hire the same contractor to build again. That usually comes down to a few things that never appear in a photograph: the budget was clear and changes were handled fairly, the schedule was realistic and communicated honestly, the jobsite was safe and organized, inspections went smoothly, and the finished building performs as intended for years afterward.
For commercial owners, success also means opening on time, because a delayed opening can mean lost rent or revenue. For homeowners, it means a home that stays dry, cool and secure through Florida summers and storm seasons. We measure our work against those outcomes, not against how a space looks on the day it is finished.
How Do We Handle Problems During Construction?
Every construction project encounters surprises: concealed damage in an older building, a conflict between drawings, a material delay or a weather event. What separates a well-run project is how quickly those problems are identified, communicated and resolved.
When an issue comes up, we document it, explain the options and their cost and schedule impact, and get the owner’s decision before proceeding. Design questions go to the architect or engineer through a documented request for information. Unforeseen conditions are photographed and priced transparently. This approach protects the owner’s budget and keeps the project record clear, which matters for warranties, insurance and future work on the building.
- Issue identified and documented with photos
- Options developed with cost and schedule impact
- Design team consulted where required
- Owner decision recorded before work proceeds
- Schedule updated and shared with the team
Which Delivery Method Fits Your Project?
How a project is contracted affects how the work unfolds. Owners with complete drawings often choose traditional general contracting, while owners who want one team for design and construction may prefer design-build. Larger or more complex projects benefit from construction management, where the contractor joins during design to guide budget and constructability. Our services page explains each option, and our consulting service can help you decide which approach fits your goals, budget and timeline.
How Do Commercial and Residential Projects Differ in Practice?
Commercial and residential projects share many building techniques, but the way they are managed differs. Commercial projects typically involve more formal documentation: submittals, requests for information, pay applications, life-safety and accessibility reviews, and coordination with landlords, tenants and lenders. Schedules are often tied to lease dates or business openings, so sequencing and inspection timing are critical.
Residential projects tend to involve more direct owner decisions on finishes and layout, and frequently take place in or next to an occupied home. Clear selection schedules, dust and noise control, and frequent communication matter most. Our team brings the documentation habits of commercial work to residential projects such as additions and kitchen remodels, and brings a homeowner’s attention to detail to commercial interiors.
Whatever the project type, the goal is the same: a building that is permitted, inspected, documented and built to last in Florida’s climate. If you are weighing whether your project is a good fit, reach out and we will talk it through.
Why Do References Matter More Than Photos?
Photos show what a finished space looks like; references tell you what it was like to build it. When you speak with a past client, ask whether the contractor communicated clearly, handled changes fairly, kept the site organized and responded after the project was complete. Ask whether they would hire the same contractor again. Those answers are the most reliable indicator of how your own project will go, and we are glad to connect serious prospective clients with references for relevant project types where past clients have agreed.
Frequently Asked Questions
Can I see examples of projects similar to mine?
Yes. Tell us your project type, size and location, and we will discuss comparable work and share relevant examples or references where clients have agreed.
What should I look for in a contractor’s portfolio?
Look for projects similar to yours in type, scale and site conditions, evidence of permitted work, construction-phase photos and references you can contact.
Do you build both commercial and residential projects?
Yes. Commercial construction is our primary focus, and we also build custom homes, additions and remodels in Southwest Florida.
How do you ensure consistent quality across projects?
We use a consistent process with checks before work is covered, inspection preparation at each stage and a documented punch list before handover.
Ready to Start Your Project?
Tell us about your project and our team will follow up to discuss scope, budget and schedule.