RESIDENTIAL · COMMERCIAL · DECORATIVE CONCRETE
Concrete Contractor in Fort Myers & Southwest Florida
Driveways, patios, slabs, foundations, decorative and stamped concrete, retaining walls, parking lots, loading docks and concrete repair for homes and commercial properties.
Concrete Built for Florida Conditions
Concrete is the foundation of nearly every building in Florida, and it is also the surface people see and use every day: driveways, sidewalks, patios, pool decks, parking lots and loading docks. DiBe Development & Construction is a licensed Florida general contractor that places and repairs concrete for homeowners, builders, property managers and commercial owners across Southwest and Southeast Florida.
Good concrete work starts long before the truck arrives. The subgrade has to be compacted, the forms set to the right grades and slopes, the reinforcement sized and positioned correctly, and the mix specified for the use and exposure. After placement, finishing, jointing and curing determine how the slab will look and perform for decades. Florida adds its own challenges: sandy and organic soils, high water tables, heavy rain, intense sun and heat that can make concrete set too quickly. We plan for all of it.
Whether you need a new driveway, a decorative patio, a slab for an addition, a foundation for a new building or a commercial parking lot, we manage the project from layout and permitting through placement, finishing and cleanup.
Concrete Services We Provide
Our concrete work covers residential, commercial and decorative projects.
- Concrete driveway installation
- Concrete sidewalk installation
- Concrete patio construction
- Concrete slab installation
- Concrete garage floor construction
- Concrete walkway installation
- Concrete staircase construction
- Concrete retaining wall construction
- Concrete foundation installation
- Reinforced concrete construction
- Decorative concrete installation
- Stamped concrete installation
- Colored concrete installation
- Exposed aggregate concrete installation
- Concrete resurfacing
- Concrete crack repairs
- Concrete demolition and replacement
- Commercial concrete flatwork
- Concrete parking lot construction
- Concrete loading dock construction
Residential Concrete
For homeowners, concrete is often the first thing visitors see. A cracked, stained or sunken driveway drags down curb appeal, while a new driveway, walkway or patio instantly upgrades a home. We remove old concrete, regrade and compact the base, set forms for proper drainage away from the house, install reinforcement and control joints, and finish the surface with the texture you want, from a broom finish for traction to smooth, stamped or exposed aggregate.
We also pour slabs for garages, additions, lanais, sheds and equipment pads, as well as stairs, landings and small retaining walls. Every residential project is laid out to work with existing grades, downspouts and landscaping so water drains away from your home instead of toward it.
- Driveways, aprons and parking pads
- Front walkways, side yards and garden paths
- Patios, lanai extensions and pool deck slabs
- Garage floors and workshop slabs
- Steps, landings and entry stoops
- Equipment pads for AC units, generators and pool equipment
Commercial Concrete & Flatwork
Commercial concrete must handle heavy loads, constant traffic and strict accessibility requirements. We place sidewalks, curbs, ramps, dumpster pads, equipment pads, parking areas and loading docks for retail centers, offices, medical buildings, warehouses and multifamily properties. We work from civil and structural drawings, coordinate inspections and testing, and schedule pours to minimize disruption for operating businesses.
Loading docks and truck courts require thicker slabs, heavier reinforcement and careful jointing to resist cracking under repeated loads. Accessible routes need precise slopes and detectable warnings. Parking lots need drainage that keeps water moving to inlets and retention areas. We build each of these to plan and to code.
- Sidewalks, ADA ramps and curbs
- Parking lots and drive aisles
- Loading docks, truck courts and aprons
- Dumpster enclosures and equipment pads
- Building slabs and slab-on-grade foundations
- Site concrete for retail, office, medical and industrial projects
Foundations & Structural Concrete
Foundations carry the entire building, so they demand engineered design and careful execution. We build monolithic slabs, stem-wall foundations, footings and grade beams for homes, additions and commercial buildings, setting finished floor elevations to meet flood requirements. Reinforcing steel is placed to engineered plans and inspected before every pour. For structural repairs to existing foundations, see our structural repair page.
In flood zones, foundations often need to raise the building well above the surrounding grade. Stem-wall foundations with compacted fill, elevated slabs and pile foundations are all common in Southwest Florida. We help owners and designers choose the most practical system for the site, soil conditions and budget.
Decorative & Stamped Concrete
Decorative concrete combines the durability of concrete with the look of stone, brick, tile or wood. Stamped concrete uses textured mats to imprint patterns such as slate, flagstone, ashlar or cobblestone, while integral color and color hardeners add rich, lasting tones. Exposed aggregate removes the top layer of paste to reveal stones in the mix for a textured, slip-resistant finish that works well around pools.
Decorative finishes are popular for patios, pool decks, entries and walkways. Because Florida sun is intense, we recommend UV-stable sealers and periodic resealing to keep colors vivid and surfaces protected. We will also talk through slip resistance and heat, especially around pools, so the finish you choose is comfortable and safe.
Concrete Repair, Resurfacing & Replacement
Not every concrete problem requires full replacement. Hairline cracks can often be routed and sealed. Worn or stained surfaces can be resurfaced with a bonded overlay. Spalling, where the surface flakes away, may be repaired by removing loose material and patching with repair mortar. Sunken slabs, structural cracks or failed concrete usually call for removal and replacement.
We evaluate the cause before recommending a fix. Settlement from poorly compacted soil, tree roots, drainage problems and corroding reinforcement are common in Florida, and a repair that ignores the cause will fail again. When replacement makes sense, we demolish and haul away the old concrete, correct the base and drainage, and pour new concrete properly reinforced and jointed.
What Makes Concrete Last in Florida
Several details separate long-lasting concrete from slabs that crack and settle within a few years. First is the base: soil must be compacted in layers, organic material removed and fill added where needed. Second is reinforcement: welded wire, rebar or fiber reinforcement must be sized and positioned correctly, not left lying on the ground. Third is jointing: control joints spaced and cut at the right depth and time guide cracks into straight lines instead of random patterns.
Fourth is the mix and placement: the right strength and slump for the application, consolidated properly and never watered down on site to make it easier to place. Finally, curing: in Florida heat, concrete can lose moisture too quickly, weakening the surface. We use curing practices suited to the weather, schedule pours to avoid the hottest part of the day when possible and protect fresh concrete from heavy rain.
- Compacted, properly graded subgrade
- Correctly sized and supported reinforcement
- Control joints spaced and cut on time
- Mix designed for the application and exposure
- Proper finishing for traction and appearance
- Curing suited to Florida heat and rain
Permits, Inspections & Testing
Driveway aprons connecting to public roads, structural slabs, foundations, retaining walls and most commercial concrete require permits, and many require inspections before the pour. Commercial projects may also require concrete testing, such as slump and cylinder tests, to confirm the mix meets specification. We handle permit applications, schedule inspections and coordinate testing so your project stays compliant and on schedule.
Who We Serve
Homeowners
Driveways, patios, walkways and slabs that improve curb appeal and function.
Builders
Foundations, slabs and flatwork coordinated with the construction schedule.
Commercial Owners
Parking lots, sidewalks, loading docks and site concrete for operating properties.
Property Managers
Repairs, replacements and ADA upgrades for apartment and retail properties.
Associations
Sidewalk, walkway and common-area concrete programs.
Pool Owners
Pool decks and decorative surfaces built for heat and traction.
Our Process
01. Site Visit
Measure, check grades, drainage and access, and discuss finishes.
02. Estimate
Clear scope, thickness, reinforcement, finish and pricing.
03. Permits
Permit applications and inspection scheduling where required.
04. Preparation
Demolition, excavation, base compaction, forms and reinforcement.
05. Placement & Finishing
Pour, consolidate, finish, joint and cure.
06. Cleanup
Forms removed, site restored and care instructions provided.
Consulting Before You Build
Not ready to start construction? DiBe Development & Construction also offers construction consulting: feasibility reviews, budgets, plan and bid reviews, schedules and owner’s representation. Many clients start with a consultation to understand scope, cost and risk before committing to a full project.
Related Services
Structural Repairs & Masonry
Foundation repairs, beams, block walls and structural restoration.
Site Development
Grading, drainage, parking lots and site utilities.
Outdoor Living
Lanais, pool decks, pergolas and outdoor kitchens.
Demolition & Site Work
Concrete removal, clearing and site preparation.
Commercial Construction
Ground-up commercial buildings.
Custom Homes
New homes with foundations built to flood code.
See all construction services, our service areas and the full site map.
Service Areas
We provide concrete construction services throughout Southwest Florida, including Fort Myers, Cape Coral, Lehigh Acres, Naples, Estero and Bonita Springs, and Southeast Florida, including Miami, Fort Lauderdale and West Palm Beach.
What Drives the Cost of a Concrete Project in Southwest Florida
Concrete pricing in Lee, Collier and Charlotte counties is shaped by a handful of variables that owners can understand before a single yard is ordered. The first is volume: the square footage of the pour multiplied by its thickness determines how many cubic yards the ready-mix supplier delivers, and small pours often carry a short-load fee because the truck leaves the plant partly empty. The second is access. A driveway that a truck can back onto directly costs less to place than a pool deck behind a house that needs a line pump or a boom pump to reach.
Site preparation is often the largest hidden factor. Removing an existing slab, hauling the debris, correcting grade, adding and compacting fill, and treating for termites all happen before forming begins. On commercial sites, subgrade testing, proof rolling and density reports may be required by the engineer of record. Reinforcement adds cost as well: wire mesh, fiber additives, rebar mats, dowels into existing slabs and post-tension tendons each carry different material and labor requirements.
Finishes come last but matter to the budget. A standard broom finish is the most economical surface for driveways and walks. Stamped patterns, integral color, exposed aggregate, polished floors and decorative saw cuts all add time and skilled labor. We price each of these items separately in our proposals so you can see exactly where the money goes and decide which upgrades are worth it for your property.
Typical line items in a concrete proposal
Demolition and haul-off, excavation and grading, fill and compaction, termite pretreatment where required, vapor barrier, forming, reinforcement, concrete material, placement and finishing labor, pumping, control joints, curing, sealing, permit fees and inspections, and cleanup.
Concrete Strength, Mix Design and Florida Conditions
Concrete is specified by compressive strength, measured in pounds per square inch after 28 days of curing. Residential flatwork such as sidewalks and patios is commonly placed at 3,000 psi, driveways and garage slabs frequently at 3,000 to 4,000 psi, and structural elements such as footings, columns, tie beams and elevated slabs at whatever strength the structural engineer specifies on the drawings. On commercial and multifamily projects, the mix design is submitted for approval before the first pour.
Florida heat and humidity change how concrete behaves. High temperatures speed up setting, which can lead to cold joints, plastic shrinkage cracks and finishing problems if the crew is not prepared. We schedule large pours for early morning, coordinate retarders or other admixtures with the supplier when appropriate, keep finishing crews sized to the pour, and begin curing promptly so the surface does not dry out before it gains strength.
Coastal properties bring another consideration: chloride exposure. Salt air and brackish water can attack reinforcing steel over time, which is the root cause of the spalling seen on many older coastal buildings. Adequate concrete cover over the rebar, proper mix design, and sealing exposed surfaces all help extend service life near the water.
Our Driveway Replacement Process, Step by Step
Driveway replacement is one of the most common concrete projects for Southwest Florida homeowners, and a clear process keeps it predictable. It begins with a site visit to measure the area, check drainage, look at the apron and right-of-way, and discuss finish options. We then prepare a written proposal and, where the municipality requires it, apply for a right-of-way or driveway permit.
On demolition day the old concrete or pavers are broken out and hauled away. The base is regraded and compacted so water drains away from the garage and the house. Forms are set to the approved layout, reinforcement is installed, and any required inspection is scheduled before the pour. After placement and finishing, control joints are cut or tooled to manage cracking, and the slab is cured. Most residential driveways can take foot traffic within a day or two and vehicle traffic after about a week, though we give you specific guidance based on the mix and weather.
- Measure, assess drainage and review finish options
- Written proposal and permit application where required
- Demolition and debris removal
- Grading and base compaction
- Forming and reinforcement
- Inspection where required
- Pour, finish and joint cutting
- Curing, cleanup and final walkthrough
Commercial Concrete: ADA, Parking and Site Details
Commercial concrete work has to satisfy accessibility codes as well as structural requirements. Curb ramps, accessible routes, landings at entrances and accessible parking spaces all have slope and cross-slope limits that must be met in the finished surface, not just on paper. We form and check these areas carefully and coordinate detectable warning surfaces where they are required.
Parking areas, dumpster pads, loading docks and drive aisles see heavy wheel loads and turning forces. These areas typically require thicker sections, heavier reinforcement and well-planned joint layouts. We coordinate with the civil engineer on site drainage, inlet tie-ins, curb and gutter, and sidewalk connections to the public right-of-way so the concrete package fits the overall site development plan.
Sealing, Maintenance and Making Concrete Last
Good concrete can last decades with modest care. Sealing decorative and exterior surfaces helps resist staining, mildew and water intrusion, and stamped or colored concrete usually benefits from periodic resealing. Keeping control joints filled, directing downspouts and irrigation away from slab edges, and addressing settlement early all extend service life.
Cracks are a normal characteristic of concrete, and control joints are designed to make sure they happen in straight, planned lines. Wide, displaced or growing cracks are a different matter and can point to base or drainage problems. If you are seeing that kind of movement, we can assess the cause before recommending repair or replacement. For older commercial buildings with spalling or exposed rebar, see our building restoration services.
Choosing the Right Concrete Contractor
When comparing concrete contractors, look beyond the bottom-line price. Confirm the contractor is licensed and insured in Florida, ask who will pull the permit, and make sure the proposal spells out thickness, strength, reinforcement, base preparation, joint layout and finish. Ask how the crew handles hot-weather pours and curing, and what happens if the inspection or the weather forces a reschedule.
DiBe Development and Construction approaches concrete as part of the whole building, not as an isolated trade. Because we manage commercial projects, custom homes, additions and site development, our concrete scopes are coordinated with framing, plumbing, electrical and drainage so the slab is right the first time. Call (239) 414-3423 to schedule a site visit or ask about a consulting review of an existing concrete bid.
Concrete Construction FAQs
How thick should a concrete driveway be?
Residential driveways are commonly four inches thick, and heavier loads such as RVs, boats or trucks may call for five or six inches with additional reinforcement. We recommend the right thickness after discussing how the driveway will be used.
How long before I can drive on new concrete?
Foot traffic is usually fine within a day or two, and passenger vehicles typically after about a week, depending on the mix and weather. Heavy vehicles should wait longer. We give you specific guidance for your project.
Why does concrete crack?
Concrete shrinks as it cures and moves with temperature and soil changes. Control joints guide those cracks into straight lines. Random or wide cracks usually point to poor base preparation, missing reinforcement, joints cut too late or drainage problems.
Is stamped concrete slippery?
It can be when wet if sealed with a glossy finish. We use slip-resistant additives in sealers and recommend textures suited to pool decks and walkways.
Can you repair my concrete instead of replacing it?
Often, yes. Cracks, surface wear and some spalling can be repaired or resurfaced. Sunken or structurally failed concrete usually needs replacement. We assess the cause and recommend the most cost-effective fix.
Do I need a permit for a driveway?
Many jurisdictions require a permit, especially for the apron that connects to the street. We confirm requirements and handle the permit.
Do you pour commercial parking lots and loading docks?
Yes. We build parking areas, drive aisles, truck courts and loading docks from engineered plans.
How do you keep concrete from cracking in Florida heat?
We schedule pours for cooler parts of the day when possible, use proper curing methods, cut joints on time and avoid adding water at the site, all of which reduce shrinkage cracking.
How thick should a concrete driveway be in Florida?
Residential driveways are commonly placed at 4 inches thick, and areas that see heavier vehicles such as RVs, boats or trucks are often thickened to 5 or 6 inches with added reinforcement. Local codes and the design for your property determine the final specification.
How long before I can drive on new concrete?
Foot traffic is usually fine after 24 to 48 hours, and passenger vehicles after about seven days. Heavy vehicles should wait longer. Concrete continues gaining strength for about 28 days.
Do you pour concrete in the summer heat?
Yes. We schedule pours early in the day, coordinate admixtures with the supplier when appropriate, staff finishing crews for the size of the pour and start curing promptly to protect the surface.
Do you offer concrete consulting for owners and developers?
Yes. Through our construction consulting service we review concrete scopes, bids and schedules, and help owners understand options before committing to a contractor or design.
Need a Concrete Contractor?
Tell us about your project and our team will follow up to discuss scope, budget and schedule.