COMMERCIAL GENERAL CONTRACTOR · MIAMI-DADE COUNTY
Commercial Construction in Miami, FL
Ground-up commercial buildings, tenant build-outs and multifamily renovations in Miami and Miami-Dade County, built to High-Velocity Hurricane Zone standards.
A Commercial Contractor for Miami’s Pace
Miami is one of the most dynamic commercial construction markets in the country. Tight urban sites, aggressive schedules, strict hurricane codes and demanding owners and tenants leave little room for error. DiBe Development & Construction brings disciplined preconstruction, early procurement and daily supervision to commercial projects across Miami and Miami-Dade County.
We build ground-up commercial buildings, complete restaurant, retail, medical and office build-outs and renovate multifamily and condominium properties. Whether you are a developer, an operator opening a new location or an association planning repairs, we manage the project under one contract with transparent budgets and clear reporting.
Commercial Construction Services in Miami
Commercial Construction
Ground-up office, retail, restaurant, medical, industrial and mixed-use buildings in Miami.
Tenant Improvements
Restaurant, retail, medical, office and franchise build-outs in Miami.
Multifamily & Condo
Apartment and condo renovations, common areas, balconies and façades.
Preconstruction & CM
Feasibility, estimating, scheduling and owner’s rep services.
Structural & Concrete
Structural repairs, concrete restoration and masonry.
Exterior & Storefronts
Storefronts, impact windows and envelope repairs.
Building in Miami: What to Know
High-Velocity Hurricane Zone
Miami-Dade County is part of Florida’s High-Velocity Hurricane Zone, which requires stricter product approvals, including Miami-Dade Notice of Acceptance products for windows, doors, storefronts and roofing, along with additional inspections. We specify approved products and build to HVHZ requirements from the start.
City and County Permitting
Projects inside the City of Miami are permitted through the city, while other municipalities and unincorporated areas have their own departments or fall under Miami-Dade County. We confirm the right jurisdiction and manage plan review, revisions and inspections.
Urban Sites and Logistics
Many Miami projects sit on tight infill lots with limited staging, busy streets and neighboring buildings. We plan deliveries, crane and equipment access, sidewalk and right-of-way permits and site safety carefully to keep work moving.
Older Buildings and Milestone Inspections
Older condominium and commercial buildings in Miami-Dade may be subject to recertification and statewide milestone inspection requirements that lead to structural and concrete repairs. We work with engineers to plan and complete those repairs while buildings stay occupied.
Miami Areas We Serve
We take commercial projects throughout Miami, including Brickell, Downtown, Wynwood, Edgewater, Little Havana, Allapattah, Coral Way and the Design District, along with Doral, Hialeah, Coral Gables, Kendall, Homestead and the rest of Miami-Dade County, plus nearby Fort Lauderdale.
How We Work
01. Consultation
We learn your goals, budget and timeline.
02. Site Review
We review the property, plans and local requirements.
03. Detailed Estimate
A written estimate with scope, pricing and schedule.
04. Permits
We prepare and manage permits and approvals.
05. Construction
Daily supervision and weekly progress updates.
06. Closeout
Inspections, punch list and warranty support.
Why Choose DiBe Development & Construction
- Licensed Florida certified general contractor
- Commercial and residential experience under one roof
- Detailed, line-item estimates and documented change orders
- Hurricane-code and flood-zone construction experience
- One point of contact from start to finish
- Weekly communication and photo updates
Nearby Areas & Related Services
Fort Lauderdale Commercial Construction
Commercial construction in Fort Lauderdale and Broward.
West Palm Beach Commercial Construction
Commercial construction in West Palm Beach.
Commercial Construction
Our full commercial construction services.
Tenant Improvements
Commercial build-outs and interior renovations.
Multifamily Construction
Multifamily and condo renovations.
Construction Management
Preconstruction and construction management.
See all construction services, our service areas and the full site map.
How Much Does Commercial Construction Cost in Miami?
There is no reliable per-square-foot number that fits every Miami project, and any contractor who quotes one before seeing drawings is guessing. Commercial construction costs in Miami depend on the building type, the condition of the site or existing space, the level of finish, the mechanical and electrical load, and the hurricane-rated products the design requires. A second-generation restaurant space with usable grease, ventilation and plumbing infrastructure can cost far less to open than a first-generation shell that needs every system brought in from the street.
Miami adds its own cost pressures. Urban sites often have little or no laydown area, so materials arrive in smaller, more frequent deliveries. Parking, street use and crane or hoist logistics can require additional coordination with the city and county. High-Velocity Hurricane Zone (HVHZ) requirements affect windows, doors, storefronts, roofing and other envelope components, and approved products can carry longer lead times than standard ones. Labor availability across the region also shifts with the overall pace of construction in South Florida.
The most useful step an owner can take is to involve the contractor early. Through our preconstruction and construction management services, we prepare budgets at each design stage so you can make decisions about scope and finishes while changes are still inexpensive. Owners who want an independent review of a budget, schedule or bid package before they commit can also use our construction consulting services.
- Building type and occupancy classification (restaurant, medical, retail, office, assembly)
- Condition of the existing space or site, including demolition and hidden conditions
- HVHZ-rated windows, doors, storefronts and roofing components
- Mechanical, electrical and plumbing loads and whether existing systems can be reused
- Fire sprinkler and fire alarm modifications
- Accessibility upgrades required when an existing space is altered
- Site access, deliveries, parking and staging constraints
- Finish level, millwork, specialty equipment and owner-furnished items
- Schedule requirements, including after-hours or occupied-building work
- Permit review cycles and any required resubmittals
What Types of Commercial Projects Do We Build in Miami?
Miami’s commercial market covers almost every building type, from neighborhood retail strips to medical suites and mixed-use buildings with ground-floor storefronts. Our commercial construction team takes on ground-up work as well as renovation and repositioning of existing buildings, and our tenant improvement crews handle interior build-outs for operators moving into leased space.
Restaurants and food service
Restaurant projects involve kitchen exhaust, grease interceptors, gas service, walk-in coolers, health department requirements and finish-heavy dining rooms. Coordination between the kitchen equipment supplier, licensed mechanical and plumbing contractors and the design team is the difference between an on-time opening and a delayed one.
Retail and storefronts
Retail work in Miami frequently involves impact-rated storefront systems, signage coordination with landlords, and tight turnover windows. We plan sequencing so fixtures, finishes and inspections line up with the tenant’s opening date.
Medical and professional offices
Medical suites require careful planning for plumbing at exam rooms, specialized electrical, sound separation and accessibility. We coordinate with equipment vendors so rough-ins are correct the first time.
Multifamily and mixed-use
Apartment and condominium properties need common-area renovations, unit turns, façade and balcony repairs and life-safety upgrades. Our multifamily construction experience helps owners and associations plan work around residents.
Restoration and structural repair
Many Miami buildings are decades old and exposed to salt air. Our building restoration and structural concrete and masonry work addresses spalling concrete, deteriorated balconies and envelope failures.
Step by Step: How a Miami Commercial Project Moves From Idea to Opening
Every project is different, but most commercial work in Miami follows a predictable sequence. Understanding it helps owners plan leases, financing and opening dates realistically.
- Define goals: budget range, target opening date, use and any lease or lender requirements.
- Site or space evaluation: existing conditions, utilities, structure, access and code issues.
- Design coordination: architect and engineers develop drawings while we provide cost and constructability feedback.
- Budget and schedule: a detailed estimate and a realistic timeline based on the drawings.
- Permitting: submittal to the City of Miami or Miami-Dade County, depending on where the property sits, plus responses to review comments.
- Procurement: ordering long-lead items such as HVHZ storefronts, electrical gear and HVAC equipment early.
- Construction: demolition, structure, rough-ins by licensed trades, inspections, and finishes.
- Closeout: final inspections, certificate of occupancy or completion, punch list, warranties and documentation.
Commercial Construction Services We Provide in Miami
The list below covers the work we most often perform or manage for Miami owners, developers, operators and associations. Specialty trades such as electrical, plumbing, HVAC, roofing and fire protection are performed by licensed trade contractors, with DiBe coordinating the work as the general contractor.
- Ground-up commercial building construction
- Restaurant build-outs and kitchen renovations
- Retail store build-outs and storefront replacement
- Medical and dental office build-outs
- Professional office build-outs and renovations
- Second-generation space renovations
- Shell and white-box construction for landlords
- Mixed-use building construction
- Multifamily common-area renovations
- Condominium balcony and concrete restoration
- Structural repairs identified during building inspections
- Impact window and door replacement (HVHZ-rated products)
- Building envelope and waterproofing repairs
- Interior demolition and selective demolition
- Accessibility (ADA) upgrades for existing buildings
- Warehouse and light industrial renovations
- Office build-outs inside industrial buildings
- Façade improvements and exterior renovations
- MEP coordination with licensed trade contractors
- Preconstruction estimating and owner’s representation
What Should Owners Know About HVHZ Requirements in Miami?
Miami-Dade County sits within Florida’s High-Velocity Hurricane Zone, which applies stricter design and product standards than most of the state. In practical terms, exterior products such as windows, doors, storefronts, skylights, roofing and certain cladding systems must carry approvals that demonstrate they meet these standards. Installation must follow the approved details, and inspectors check that what is installed matches what was approved.
For owners, HVHZ requirements mostly show up in three places: budget, lead time and documentation. Approved products can cost more than standard ones, some have longer manufacturing and delivery times, and the permit package must include the right product documentation. We address all three early by confirming approved products during design, ordering long-lead items as soon as approvals allow, and keeping submittals organized so inspections are not delayed.
Envelope work on existing buildings deserves extra attention. When storefronts or windows are replaced in an older building, the surrounding wall, anchoring substrate and waterproofing may need repair before the new system can be installed correctly. Our roofing, exterior and windows coordination accounts for those conditions so the finished opening performs as intended.
How Do We Manage Construction on Tight Urban Sites?
Many Miami projects sit on busy streets, inside occupied buildings or on lots with no room to stage materials. We plan logistics before mobilizing: delivery windows, where dumpsters and material can be placed, how workers will park, how dust and noise will be controlled, and how neighbors and tenants will be kept informed. When work happens inside an occupied building, we phase the scope so building systems, exits and common areas stay functional.
Our demolition and site work planning includes protecting adjacent spaces, identifying utilities before cutting, and sequencing debris removal so it does not disrupt the property. For larger sites, our site development team coordinates grading, drainage and utility connections with civil engineers and the authorities having jurisdiction.
Miami Commercial Project Planning Checklist
Owners who prepare these items before design starts usually move through permitting and construction with fewer surprises.
- Confirm zoning and permitted use for the property
- Review the lease for landlord work, tenant work and approval requirements
- Gather existing drawings, surveys and prior permits for the building
- Identify the authority having jurisdiction (city or county)
- Set a realistic budget range and contingency
- Define the opening or occupancy date and work backward
- Engage an architect and engineers licensed in Florida
- Identify long-lead equipment and HVHZ-rated products
- Plan insurance, builder’s risk and lender draw requirements
- Decide on owner-furnished items and who installs them
Do We Serve Other South Florida Markets Near Miami?
Yes. In addition to the City of Miami and unincorporated Miami-Dade, we work in Coral Gables, where the Board of Architects review shapes many projects, and in Doral, where warehouse and office-warehouse work is common. To the north, our Hollywood and Fort Lauderdale pages cover Broward County, which also falls within the HVHZ. We also serve Southwest Florida from our home base, including Fort Myers and Naples.
How Long Does a Commercial Project in Miami Take?
Timelines in Miami are shaped by three phases that overlap but do not move at the same speed: design, permitting and construction. A small interior renovation with limited mechanical work may move from drawings to completion fairly quickly, while a restaurant, medical suite or ground-up building involves more reviews, more inspections and more long-lead equipment. Rather than promise a generic number, we build a schedule from the actual drawings, the permit path and the procurement list for your project.
Permitting is often the least predictable piece. Review times vary with the jurisdiction, the workload of the department, the complexity of the plans and how many comment cycles are needed. Complete, coordinated drawings shorten that process. During construction, the critical path usually runs through rough-in inspections, equipment deliveries and envelope products. We track those items weekly and report progress to owners so they can plan staffing, inventory and marketing around a realistic opening date.
What Makes Miami Different From Other Florida Markets?
Miami’s building stock is unusually varied. Within a few miles you can find mid-century commercial strips, older low-rise apartment buildings, newer towers, converted warehouses and modern mixed-use projects. Each type brings its own issues. Older concrete buildings near the bay and ocean can show corrosion and spalling from salt exposure. Converted industrial buildings may need significant upgrades to fire protection, accessibility and electrical service before they can house restaurants, offices or retail. Newer buildings often have strict landlord construction standards, approved contractor requirements and loading-dock schedules that shape how tenant work is performed.
The region’s low elevation and high water table also matter. Below-grade work is limited, drainage design is critical, and FEMA flood zone designations can affect floor elevations, flood-resistant materials and how substantial improvements to existing buildings are evaluated. We review flood-related requirements with the design team early so they do not appear as late surprises in plan review.
Finally, Miami owners are often working against fixed dates: a lease commencement, a seasonal opening, a lender deadline or a condominium association’s repair schedule. Our job is to translate those dates into a plan that accounts for permitting, procurement and inspections honestly, and then to manage the work daily so the plan holds.
Why Do Owners Bring Us In Before Design Is Finished?
Early involvement lets us price options while they are still options. We can compare storefront systems, evaluate whether existing HVAC or electrical service can be reused, flag code issues in an older building and suggest sequencing that shortens the schedule. That feedback helps architects and engineers produce drawings that are both buildable and within budget. For owners who already have a contractor but want a second opinion, our construction consulting work includes bid reviews, schedule reviews and change-order analysis.
Our MEP coordination process is a large part of that value. Mechanical, electrical and plumbing systems drive a significant share of the cost and schedule risk in commercial work, and conflicts between them are easier to resolve on paper than in the field. We coordinate licensed trade contractors so ductwork, piping, conduit and structure fit together before installation begins.
What Should You Ask a Miami Commercial Contractor Before Hiring?
Choosing a contractor is one of the most important decisions in any project. These questions help owners compare firms on substance rather than price alone.
- Are you a licensed Florida general contractor, and can I verify the license?
- What insurance do you carry, and can you provide certificates naming the owner and landlord?
- How do you handle HVHZ product approvals and submittals?
- Who will supervise the site day to day?
- How do you report progress, schedule and budget to owners?
- How are change orders priced and approved?
- Which licensed trade contractors will perform MEP, roofing and fire protection work?
- What does your closeout package include?
What Happens at Project Closeout?
A project is not finished when the last finish is installed. Closeout includes final inspections by the building department and fire officials, obtaining a certificate of occupancy or completion, completing the punch list, and delivering documentation the owner will need to operate the building. That package typically includes warranties, equipment manuals, as-built information from the trades, and records of approved products used in the envelope.
We walk the space with the owner and design team, document remaining items and close them out on a defined schedule. For tenants, we coordinate with the landlord’s closeout requirements so security deposits and tenant improvement allowances can be released without delay. Good closeout makes future maintenance, insurance renewals and building inspections simpler for years to come.
Explore Related Pages
- Commercial Interiors Contractor: office, medical, retail and restaurant interiors across Florida
Miami Commercial Construction FAQs
Do you build commercial projects in Miami?
Yes. We build ground-up commercial buildings, tenant build-outs and multifamily renovations in Miami and Miami-Dade County.
Are you experienced with HVHZ requirements?
Yes. We specify Miami-Dade approved products and build to High-Velocity Hurricane Zone standards.
Do you do restaurant build-outs in Miami?
Yes. We build full restaurant build-outs including kitchen exhaust, grease and health department coordination.
Can you help with condo milestone inspection repairs?
Yes. We work with structural engineers to complete required repairs.
Do you offer preconstruction services?
Yes. We provide feasibility, estimating, scheduling and permit strategy.
Do you work in other Miami-Dade cities?
Yes, including Doral, Hialeah, Coral Gables, Kendall and Homestead.
How much does a commercial build-out cost in Miami?
It depends on the space’s existing condition, the use, mechanical and electrical needs, HVHZ product requirements and finish level. We provide a detailed estimate after reviewing the drawings and the space.
Who issues commercial permits in Miami?
Properties within the City of Miami are permitted by the city’s building department, while unincorporated areas go through Miami-Dade County. Other municipalities in the county, such as Coral Gables and Doral, run their own departments.
Do HVHZ requirements affect my project schedule?
They can. HVHZ-approved windows, storefronts and roofing products sometimes have longer lead times, so we confirm products during design and order them as early as approvals allow.
Can you work inside an occupied building in Miami?
Yes. We phase work, control dust and noise, maintain exits and coordinate shutdowns with building management so tenants and residents can keep operating.
How long does a restaurant build-out take in Miami?
It depends on the existing infrastructure, the permit review, kitchen equipment lead times and inspections. Second-generation restaurant spaces are usually faster than first-generation shells. We build a project-specific schedule after reviewing the drawings.
Planning a Commercial Project in Miami?
Tell us about your project and our team will follow up to discuss scope, budget and schedule.