Restoration & Specialty Construction · Florida
Building Restoration & Specialty Construction in Florida
Concrete restoration, balcony and facade repair, parking structures, structural repairs and adaptive reuse for condominiums, commercial buildings and multifamily properties.
Extending the Life of Florida Buildings
Florida buildings live in a demanding environment. Salt air, heavy rain, humidity, intense sun and hurricane winds attack concrete, steel, stucco, sealants and roofing year after year. Over time, water and chlorides reach reinforcing steel, the steel corrodes and expands, and the surrounding concrete cracks and spalls. Left alone, small problems become structural problems.
DiBe Development and Construction provides restoration and specialty construction for condominium associations, commercial property owners, multifamily owners and property managers in Southwest Florida and along the southeast coast. We work from engineered repair documents, coordinate with the engineer of record and manage the work in occupied buildings with attention to safety, access and communication.
Since Florida adopted statewide milestone inspection and structural integrity reserve requirements for many condominium and cooperative buildings, associations have needed qualified contractors to carry out the repairs identified by engineers. We help associations understand repair scopes, phase work and keep projects moving.
Restoration and Specialty Services
Our demolition, restoration and specialty construction services include:
- Residential building demolition
- Commercial building demolition
- Interior selective demolition
- Kitchen demolition
- Bathroom demolition
- Concrete demolition
- Structural demolition
- Garage demolition
- Swimming pool demolition
- Historic building restoration
- Building facade restoration
- Balcony restoration
- Parking garage restoration
- Concrete spalling repairs
- Structural corrosion repairs
- Waterproofing restoration
- Building envelope restoration
- Commercial building rehabilitation
- Adaptive reuse construction
- Abandoned property rehabilitation
Concrete Spalling: Causes and Repairs
Spalling is the cracking, flaking or breaking away of concrete, usually caused by corrosion of the reinforcing steel inside. When moisture and chlorides reach the steel, rust forms and expands to several times the volume of the original metal, creating pressure that cracks the concrete from within. On coastal buildings this is often seen on balcony edges, slab soffits, columns, beams and parking structures. Rust stains, hairline cracks along the line of reinforcing and hollow-sounding concrete are early warning signs.
Proper spall repair goes well beyond patching the surface. Damaged concrete is removed to sound material and behind the corroded steel, the steel is cleaned and treated or replaced if it has lost too much section, and the area is restored with repair mortar or concrete specified by the engineer. Many repairs also include corrosion-inhibiting treatments, coatings or sealers to slow future deterioration. Repairs that simply skim over corroded steel tend to fail again within a few years.
- Sound and map deteriorated concrete
- Shore the structure where required
- Remove concrete to sound material
- Clean, treat or replace reinforcing steel
- Restore with engineered repair materials
- Apply coatings, sealers or waterproofing
- Engineer observation and close-out
Balcony and Facade Restoration
Balconies take the full force of Florida weather. Restoration projects often include spall repairs, railing removal and reinstallation or replacement, new waterproofing membranes, tile or coating systems, and sealant replacement at doors and windows. Balcony work in occupied condominiums requires careful scheduling, resident notices, protection of interiors and safe access with swing stages, mast climbers or scaffolding.
Facade restoration addresses cracked stucco, failed sealants, deteriorated concrete, water intrusion around windows and paint or coating systems that no longer protect the building. A coordinated facade project combines structural repairs, waterproofing and a new protective coating so the building looks refreshed and is better protected against water intrusion.
Parking Garage Repair
Parking structures endure vehicle traffic, standing water, salt and constant temperature swings. Common problems include spalling at slab soffits and beams, cracked or delaminated topping slabs, failed expansion joints, leaking drains, deteriorated traffic coatings and corroded post-tension tendons. Repairs are typically phased to keep part of the garage in service, with clear signage and traffic control.
We coordinate garage restoration with the structural engineer and specialty subcontractors for post-tension repair, traffic coatings and joint systems. Restoring the protective coating and waterproofing after structural repairs is essential to slowing future deterioration.
Adaptive Reuse and Building Conversions
Adaptive reuse turns an existing building into something new: an older retail center into medical offices, a warehouse into flex or creative space, or an office building into residential units. Reusing a structure can save time and material, but it requires careful evaluation of the existing structure, systems, code requirements for the new use, accessibility and energy upgrades.
We help owners evaluate conversion opportunities through preconstruction and consulting services, then manage selective demolition, structural modifications, new mechanical, electrical and plumbing systems coordinated with licensed trade partners, and new interiors. Change-of-use projects often trigger fire protection, egress and accessibility upgrades that must be identified early.
Who We Serve
Condominium associations
Milestone inspection repairs, balconies, facades and garages.
Commercial property owners
Facade, structural and envelope repairs for retail, office and industrial buildings.
Multifamily owners
Exterior restoration and interior renovations for apartment communities.
Investors and developers
Adaptive reuse, building conversions and value-add renovations.
Our Process
01. Engineering review
We review the engineer’s condition assessment and repair documents.
02. Scope and phasing
We define quantities, access, phasing and resident impacts.
03. Proposal
Unit pricing for repairs plus fixed costs for access and protection.
04. Mobilize safely
Shoring, access, protection and notices are put in place.
05. Repair and waterproof
Structural repairs followed by protective systems.
06. Close-out
Engineer acceptance, documentation and warranties.
Consulting Before You Build
Not ready to start construction? DiBe Development & Construction also offers construction consulting: feasibility reviews, budgets, plan and bid reviews, schedules and owner’s representation. Many clients start with a consultation to understand scope, cost and risk before committing to a full project.
Related Services
Demolition & Site Work
Selective and full demolition.
Structural Concrete & Masonry
Columns, beams, slabs and block walls.
Storm Damage Reconstruction
Hurricane and flood repairs.
Roofing, Exterior & Windows
Building envelope and stucco.
Multifamily Construction
Apartment and condominium construction.
Construction Consulting
Owner representation and repair scope review.
See all construction services, our service areas and the full site map.
Service Areas
We provide building restoration services throughout Southwest Florida, including Fort Myers, Cape Coral, Lehigh Acres, Naples, Estero and Bonita Springs, and Southeast Florida, including Miami, Fort Lauderdale and West Palm Beach.
Milestone Inspections and Condominium Restoration
Florida law now requires milestone structural inspections for many condominium and cooperative buildings three stories or taller, based on the building’s age and, in some cases, its proximity to the coast. When an engineer’s inspection identifies substantial structural deterioration, the association must have repairs designed and completed within set timeframes. Associations are also required to complete structural integrity reserve studies and fund reserves for key building components.
For boards and property managers, this creates a demanding process: hiring an engineer, understanding the findings, budgeting and assessing owners, selecting a qualified contractor, and managing the work while residents continue living in the building. DiBe Development and Construction supports associations through that process. We review the engineer’s documents, help develop realistic budgets and phasing plans, provide transparent unit pricing and keep the board informed with regular reports and quantity tracking.
Clear communication with residents is one of the most important parts of a successful condominium restoration. We provide advance notices for balcony access, noise and parking impacts, coordinate with management on access to units, and protect interior finishes when work requires entry. A well-run project builds trust with owners and makes future phases easier to approve.
- Review of engineering reports and repair drawings
- Budgeting and phasing support for boards
- Transparent unit pricing and quantity tracking
- Resident notices and access coordination
- Regular progress reports to management
- Engineer observation and close-out documentation
Waterproofing and Building Envelope Repairs
Most building deterioration starts with water. Restoring the building envelope, the barrier between the interior and the weather, is often the best long-term investment an owner can make. Envelope repairs include replacing failed sealants at windows, doors and joints, repairing cracked stucco and concrete, applying elastomeric or breathable coatings, installing waterproofing membranes on balconies and walkways and correcting flashing at roof edges and penetrations.
Leaks can be hard to trace because water travels inside walls before it appears. We coordinate leak investigations with envelope consultants when needed, use water testing to confirm sources, and repair the cause rather than the symptom. The goal is a building that stays dry, which protects the structure, prevents mold and preserves interior finishes.
Structural Repairs and Strengthening
Some buildings need more than surface repair. Columns, beams and slabs that have lost reinforcing steel to corrosion, been damaged by impact or overloaded by a change in use may need strengthening. Depending on the engineer’s design, strengthening can involve additional reinforcing and concrete jackets, steel members, supplemental supports or externally bonded fiber-reinforced polymer systems applied by certified installers.
Structural repair work often requires temporary shoring to support loads while concrete is removed. Shoring is designed by an engineer and installed and removed in a specific sequence. We coordinate shoring design, installation and inspection with the engineer of record so the building remains safe throughout the repair.
Selective Demolition and Interior Renovation
Restoration often involves removing parts of a building while keeping the rest in service. Selective demolition removes finishes, partitions, ceilings or systems within defined limits, protecting the structure, fire protection and active utilities that must remain. Gut renovations take an interior back to the structure for a full rebuild. Both require careful planning for dust control, noise, debris removal and protection of adjacent occupied spaces.
Older buildings may contain asbestos, lead paint or other regulated materials. Testing should be completed before demolition, and any abatement must be performed by licensed contractors. We coordinate testing and abatement as part of the project schedule. For larger demolition scopes, see our demolition and site work page.
Historic and Older Building Renovation
Southwest Florida has older commercial buildings, mid-century homes and historic districts that deserve thoughtful renovation. These projects balance preservation with modern code, energy, accessibility and hurricane protection requirements. Historic districts may require design review approval for exterior changes, windows, materials and colors.
We approach older buildings with investigation first: understanding original construction, previous alterations and current conditions before committing to a design. That approach avoids surprises and helps owners decide where to restore original features and where to replace them with modern systems.
Access, Safety and Working in Occupied Buildings
Restoration work frequently happens at height and around occupied spaces. Access is planned for each scope: suspended swing stages for facade and balcony work on mid-rise and high-rise buildings, mast climbing platforms and scaffolding where heavier work or longer durations make them more efficient, and aerial lifts for lower elevations. Each system has engineering, inspection and training requirements, and roof anchors used for swing stages must be certified.
Public protection is just as important as worker safety. We use covered walkways, barricades and controlled zones below overhead work, and coordinate pool deck, entrance and parking closures with management. Debris from concrete removal is contained and removed daily. Noise and vibration from chipping hammers are unavoidable, so we schedule the loudest work within agreed hours and give residents and tenants advance notice.
- Swing stages, mast climbers and scaffolding
- Certified roof anchors and fall protection
- Covered walkways and overhead protection
- Controlled work zones and signage
- Daily debris containment and removal
- Advance notice for noise, access and closures
How Restoration Projects Are Priced
Restoration is different from new construction because the full extent of deterioration is not known until concrete is opened up. Engineers estimate repair quantities from visual surveys and sounding, but actual quantities often change. For that reason, restoration contracts usually combine lump-sum pricing for fixed items, such as mobilization, access equipment, protection, waterproofing and coatings, with unit prices for repairs measured in square feet, linear feet or cubic feet.
Unit pricing protects both the owner and the contractor: the owner pays for the repairs actually performed, and the contractor is fairly compensated when more deterioration is found. Accurate measurement and documentation are essential. We mark, measure and photograph repairs, share quantities with the engineer for verification and provide regular quantity reports so boards and owners can track the budget as work progresses. Contingencies for additional quantities should be part of every restoration budget.
Planning Ahead: Maintenance After Restoration
A restored building still needs maintenance. Sealants have a service life and should be inspected and replaced on a schedule. Coatings need periodic cleaning and recoating. Balcony and garage drains must be kept clear so water does not pond. Traffic coatings in parking garages wear in drive lanes and turning areas and benefit from periodic top coats. Small cracks should be routed and sealed before water reaches the reinforcing steel.
We provide owners and associations with close-out documentation, including product data, warranties and recommended maintenance intervals, which also supports reserve planning. A modest maintenance budget can extend the time between major restoration projects and reduce long-term costs significantly.
Why Choose DiBe for Restoration and Specialty Work
Restoration requires a contractor who understands structure, waterproofing and the realities of working in occupied buildings, and who communicates clearly with engineers, boards and residents. DiBe Development and Construction brings general contracting discipline to restoration: clear scopes, transparent pricing, organized documentation and a single point of accountability.
We also provide construction consulting to associations and owners who need help understanding repair options, comparing bids or planning a multi-year capital program. Call (239) 414-3423 to discuss a restoration project in Fort Myers, Naples, Cape Coral, Bonita Springs, Sarasota-area communities or along Florida’s southeast coast.
Warning Signs Your Building Needs Restoration
Owners and managers can spot many problems before they become serious. Rust stains bleeding through concrete or stucco, cracks that follow a straight line along a slab edge or column, concrete that sounds hollow when tapped, bulging or delaminating stucco, water stains on ceilings below balconies, ponding water on walkways and in garages, and leaks around windows and sliding doors all point to water intrusion or corrosion.
When you see these signs, the next step is an evaluation by a licensed engineer, who can determine whether the issue is cosmetic or structural and design the appropriate repair. We are happy to walk the property with you and your engineer to help plan next steps and develop a preliminary budget.
- Rust stains on concrete or stucco
- Cracks along slab edges, beams or columns
- Hollow-sounding or loose concrete
- Bulging, cracked or delaminated stucco
- Ceiling stains below balconies and walkways
- Ponding water and clogged drains
- Leaks at windows and sliding doors
Selective Demolition Done Carefully
On renovation and conversion projects, we remove only what the design calls for and protect everything that stays, from structural members and fire sprinklers to active electrical and plumbing serving other tenants. That care saves owners money and keeps the rest of the building operating without interruption.
Restoration After Hurricanes and Floods
Hurricanes accelerate deterioration. Wind-driven rain forces water into cracks and joints, storm surge saturates lower floors with salt water, and debris impact damages facades, railings and windows. After a storm, buildings should be evaluated for structural damage, water intrusion and electrical safety before reoccupancy. Salt water exposure can also accelerate corrosion of reinforcing steel in the following years, which makes follow-up inspection important.
We help owners and associations stabilize buildings after storms, document damage for insurance, and plan permanent repairs that improve resilience: better waterproofing, impact-rated openings, corrosion protection and flood-resistant materials on lower levels. Our storm damage reconstruction team handles the full recovery process, from emergency protection to final rebuild, and coordinates closely with adjusters, engineers and building departments throughout.
Questions to Ask Before Hiring a Restoration Contractor
Ask whether the contractor holds a Florida general contractor license and carries appropriate liability and workers compensation insurance. Ask how they price unit-price repairs, how quantities are measured and verified, and how they report progress to the board or owner. Ask about their access plan, safety program, resident communication approach and warranty terms, and request a sample schedule and phasing plan for your building.
Talk With Our Team
Every building is different, and the right restoration plan depends on its age, construction, exposure and history. Share your engineering report or describe what you are seeing, and we will help you understand the options, the likely sequence and how to budget for the work ahead.
Building Restoration FAQs
What causes concrete spalling?
Corrosion of reinforcing steel. Moisture and chlorides reach the steel, rust expands, and the surrounding concrete cracks and breaks away.
Do you work from an engineer’s repair plan?
Yes. Structural restoration should be designed and observed by a licensed engineer. We price and perform the work according to the engineered repair documents.
Can residents stay in the building during restoration?
Usually, yes. We phase work, protect units and common areas, communicate schedules and maintain safe access throughout.
Do you help with milestone inspection repairs?
Yes. We help condominium associations price, phase and complete repairs identified in milestone inspections and structural integrity reserve studies.
How is restoration work priced?
Typically with unit prices for repair quantities, since the full extent of deterioration is not known until concrete is opened, plus fixed costs for access, protection and coatings.
Do you do adaptive reuse projects?
Yes. We evaluate and build conversions such as retail to medical or warehouse to flex space, including code, accessibility and system upgrades.
Are milestone inspections required for my building?
Many condominium and cooperative buildings three stories or taller are subject to milestone inspections based on age and location. Your association’s engineer or attorney can confirm requirements for your building.
Do you coordinate asbestos testing before demolition?
Yes. We coordinate testing for regulated materials before demolition and schedule licensed abatement when required.
Will restoration quantities change during the project?
Often, yes. Hidden deterioration is common, which is why restoration uses unit pricing and contingencies. We document and report quantities regularly so there are no surprises.
Discuss Your Restoration Project
Tell us about your project and our team will follow up to discuss scope, budget and schedule.