Ground-Up Residential Construction | Licensed Florida CGC
New Home Construction in Southwest Florida: Ground-Up Homes Built on Your Lot
DiBe Construction builds single-family homes from the ground up on lots across Lee, Collier, Charlotte and Sarasota counties, with a focus on Cape Coral and Lehigh Acres. We manage the process from lot evaluation through certificate of occupancy as a licensed Florida certified general contractor.
What does ground-up new home construction in Southwest Florida involve?
Ground-up new home construction means building a house on a vacant lot rather than buying an existing home or a spec home from a production builder. In Southwest Florida, that usually means a concrete block (CBS) single-family home on a platted residential lot, built to the Florida Building Code, including its wind-load and flood provisions. The owner typically controls the lot, the floor plan, the finish level and the budget, while the general contractor handles engineering coordination, permitting, scheduling, subcontractors, inspections and closeout.
DiBe Development & Construction LLC, doing business as DiBe Construction, is a licensed Florida certified general contractor based in Fort Myers. While much of our work is commercial, we also build ground-up homes for owner-occupants, families relocating to the area, and investors. Our residential work draws on the same process discipline we use on commercial construction projects: clear scopes, realistic schedules, documented change orders and coordinated inspections.
This page is a hub for our new home construction services. It explains how building on your lot works in Southwest Florida, what affects cost and schedule, and how the process differs between Cape Coral, Lehigh Acres, Fort Myers, North Fort Myers, North Port, Punta Gorda, Port Charlotte, Naples and Golden Gate Estates. If you want a more detailed look at the two markets where we see the most demand, visit our pages on new home construction in Cape Coral and new home construction in Lehigh Acres.
Can I build a house on my own lot in Cape Coral or Lehigh Acres?
Yes. Cape Coral and Lehigh Acres were both platted decades ago into large numbers of residential lots, and many of those lots remain vacant. That makes build-on-your-lot construction common in both markets. Owners buy a lot, sometimes years before they are ready to build, and then hire a general contractor to design and construct a home on it.
Whether a particular lot is a good candidate depends on zoning, lot dimensions and setbacks, flood zone, the availability of city water and sewer or the need for a well and septic system, easements, and soil and drainage conditions. We recommend having a contractor review a lot before you buy it if possible. A short evaluation can flag fill requirements, utility costs or site constraints that change the budget significantly. If you need an independent review without committing to a build contract, our construction consulting service can provide one.
What types of new residential construction does DiBe build?
Ground-up residential work in Southwest Florida covers more than one kind of house. Depending on zoning, lot size and the owner’s goals, we can build or coordinate the following types of new residential construction:
- Custom homes designed around a specific owner, lot and lifestyle
- Single-family homes on scattered platted lots
- Duplexes for owner-occupants or investors
- Townhouses and small attached-home groups
- Waterfront homes on canal or sailboat-access lots
- Elevated homes built to meet flood zone requirements
- CBS concrete block homes, the regional standard
- ICF (insulated concrete form) homes
- Homes on stem wall foundations
- Homes on piling or pier foundations in coastal zones
- ADUs (accessory dwelling units) where local zoning permits them
- Guesthouses and detached guest suites
- Pool homes designed with lanai, pool and outdoor kitchen in mind
- Multigenerational homes with in-law suites
- Build-to-rent single-family homes
- Investor spec homes built for resale
- Rebuilds on lots where a storm-damaged home was demolished
- Knockdown-and-rebuild replacements of older homes
- Large-lot homes on acreage with well and septic
- Homes with detached garages, workshops or RV garages
Custom versus repeatable plans
A fully custom home gives the most design freedom but requires more design and engineering time. A repeatable plan adapted to your lot can reduce design time and cost. Learn more on our custom home builder page.
Rebuilding after storms
Where a home was severely damaged and demolished, a new home must meet current code, including current flood elevation requirements. See storm damage reconstruction and demolition and site work.
Where in Southwest Florida do you build new homes?
We build ground-up homes throughout Lee, Collier, Charlotte and Sarasota counties. Each area has its own building department, utility situation, flood mapping and typical lot types. The overview below highlights what matters most in each market and links to the relevant local page.
Cape Coral
Cape Coral is one of the most active build-on-your-lot markets in Florida, with large numbers of platted residential lots, many of them on canals. Key issues include flood zone and finished floor elevation, seawall condition on waterfront lots, whether city utilities are available or a well and septic system is required, and utility assessments in areas converted to central water and sewer. Waterfront lots often call for pool, dock and lanai planning from the start. See new home construction in Cape Coral and our Cape Coral general contractor page.
Lehigh Acres
Lehigh Acres in eastern Lee County has a very large inventory of vacant residential lots, and many of them rely on private well and septic systems. It is a popular area for first-time owner-builders, families seeking more space, and investors building single-family rentals and duplexes. Lot evaluation focuses on fill, drainage swales, septic design, and access. Visit new home construction in Lehigh Acres and Lehigh Acres general contractor.
Fort Myers
Fort Myers includes established neighborhoods with infill lots, newer areas east of the interstate, and riverfront properties with flood considerations. Infill lots may involve demolition of an older structure first. Our office is in Fort Myers, and we work throughout the city and unincorporated Lee County. See Fort Myers general contractor.
North Fort Myers
North Fort Myers offers a mix of riverfront, canal and inland lots, along with larger parcels in some areas. Utilities vary by location, and flood zones are a factor near the Caloosahatchee River. Learn more on our North Fort Myers general contractor page.
North Port
North Port in southern Sarasota County has many platted residential lots, much like Cape Coral and Lehigh Acres, with a mix of well and septic and central utilities. It draws owner-occupants and investors building single-family homes. See North Port general contractor.
Punta Gorda and Port Charlotte
Punta Gorda and Port Charlotte in Charlotte County include canal communities with sailboat and direct harbor access, as well as inland lots. Coastal flood zones, seawalls and elevation requirements are central to planning waterfront homes here. Visit Punta Gorda general contractor.
Naples and Golden Gate Estates
In Collier County, Golden Gate Estates is known for larger lots, often over an acre, with private well and septic systems, while Naples includes higher-value coastal and infill sites with stricter flood and design considerations. Large-lot sites can involve more clearing, longer driveways and larger septic systems. See Golden Gate Estates contractor and Naples general contractor.
How does the build-on-your-lot process work, step by step?
Every project is different, but most ground-up homes in Southwest Florida follow a similar sequence. Understanding the order of operations helps owners plan financing, make selections on time and avoid surprises.
- Lot evaluation: confirm zoning, setbacks, flood zone, utilities, easements and access.
- Boundary survey and topographic information: establish lot lines, existing grades and elevations.
- Soil and site review: identify fill needs, drainage, and any geotechnical testing the engineer requires.
- Floor plan and design: select or develop a plan that fits the lot, setbacks, budget and elevation requirements.
- Engineering: structural design for wind loads, foundation design, truss layouts and energy calculations.
- Preliminary budget and contract: define scope, allowances, schedule and payment or draw structure.
- Permitting: submit plans and supporting documents to the local building department and address review comments.
- Site preparation: clearing, fill, compaction, temporary utilities, erosion control and layout.
- Foundation and slab: footings, under-slab plumbing rough-in, termite treatment, vapor barrier, reinforcement and pour.
- Block walls and tie beam: CBS walls, reinforced cells and a poured concrete tie beam.
- Roof framing and dry-in: engineered trusses, sheathing, underlayment and roof covering.
- Windows, doors and rough MEP: impact-rated openings, plus plumbing, electrical and HVAC rough-ins by licensed trades.
- Insulation, drywall and interior finishes: cabinetry, flooring, tile, trim, paint and fixtures.
- Exterior work: stucco, paint, driveway, landscaping, final grading and utility connections.
- Final inspections and certificate of occupancy, followed by a walkthrough and punch list.
How do you evaluate a lot before building?
Lot evaluation is the most important step that owners often skip. A lot that looks inexpensive can carry significant extra site costs, while a lot that seems more expensive may already have utilities at the street and a favorable elevation. We look at the following items before pricing a home.
- Zoning designation and the residential uses it allows (single-family, duplex, multifamily).
- Lot width, depth and area, plus front, side and rear setbacks that define the buildable envelope.
- FEMA flood zone and base flood elevation, which drive minimum finished floor elevation.
- Existing grade compared with the required floor and crown-of-road elevations, which determines fill volume.
- Whether city water and sewer are available, or a private well and septic system will be needed.
- Easements for utilities or drainage that limit where structures, pools or driveways can go.
- Vegetation and any protected trees or wetland indicators that affect clearing.
- Seawall or waterfront conditions on canal lots, including condition of existing seawalls.
- Driveway access, culvert or swale requirements, and right-of-way rules.
- Assessments or utility extension charges that may apply to the parcel.
Survey and soil
A boundary survey establishes lot lines and corners; an elevation or topographic survey records existing grades. Many projects also need soil information so the engineer can confirm bearing capacity and compaction requirements. Southwest Florida soils are often sandy with a shallow water table, and some areas contain organic material or muck that must be removed and replaced with clean fill.
Flood zone and elevation
Much of coastal Lee and Charlotte counties lies in FEMA special flood hazard areas. In those zones, the lowest floor must be at or above the base flood elevation plus any local freeboard requirement. Even outside mapped flood zones, local rules often set a minimum floor elevation relative to the road. Elevation requirements affect fill, stem wall height, stairs, driveway slopes and cost, so we confirm them early.
Fill and site grading
Many lots require imported fill to raise the building pad. Fill must be placed in lifts and compacted, and the site must be graded so water drains to swales or approved outfalls rather than onto neighboring properties. On canal lots, grading must also respect seawall and shoreline conditions.
Well and septic or city utilities, and what are impact fees?
Parts of Cape Coral and much of Lehigh Acres, North Port and Golden Gate Estates are served by private wells and septic systems rather than central utilities. Other areas have city water and sewer at the street, and some neighborhoods are in the process of being converted to central utilities. Which applies to your lot has a real effect on the budget and timeline.
A well and septic system requires a well permit, a septic permit through the applicable health department, and a system designed for the home’s bedroom count and the site’s soil and water-table conditions. In some cases a mounded septic system is needed, which adds fill and cost. City utilities, by contrast, usually involve connection fees and tap or meter charges, and may involve assessments if utilities were recently extended. We help owners understand which path applies and coordinate the licensed well driller, septic contractor or plumbing contractor as needed.
Impact fees and government charges
Most Southwest Florida jurisdictions charge impact fees on new residential construction to help fund roads, schools, parks, fire, emergency services and similar infrastructure. Building permit fees, plan review fees, utility connection fees and, in some areas, assessments are separate. The amounts vary by city, county, home size and use, and they change over time, so we confirm current charges with the local jurisdiction for each project rather than relying on estimates. These government charges should be included in your budget from the start because they are due at or before permit issuance in many jurisdictions.
How do plans, engineering and permitting work?
Owners can bring an existing plan, buy a stock plan, or work with a designer or architect to develop a custom plan. Whatever the source, the plan has to be adapted to the specific lot and to Florida Building Code requirements before it can be permitted. That typically includes a site plan showing setbacks and elevations, structural engineering for wind loads, foundation design, truss engineering from the truss manufacturer, energy code calculations, and product approvals for windows, doors and roofing.
Once documents are complete, we submit them to the local building department. Plan reviewers may issue comments that require revisions before a permit is issued. Review times vary by jurisdiction and workload. During construction, the building department performs inspections at defined stages, such as foundation, slab, tie beam, framing, rough plumbing, rough electrical, rough mechanical, insulation and final. Our preconstruction and construction management process is built around keeping documents, submittals and inspections organized.
Why are most Southwest Florida homes built with CBS block construction?
Concrete block structure, often called CBS, is the standard for single-family homes in Southwest Florida. Exterior walls are built from concrete masonry units, with vertical reinforcing steel and grout in specified cells, tied together at the top by a poured, reinforced concrete tie beam. The roof trusses are anchored to the tie beam with engineered connectors. Block resists moisture, termites and wind-borne debris better than many alternatives, and local crews and inspectors are very familiar with it.
Our structural concrete and masonry and concrete work covers footings, slabs, stem walls, block and tie beams. Some owners consider insulated concrete forms (ICF) or elevated designs on pilings for specific sites; we can discuss tradeoffs during design.
Hurricane code and wind loads
The Florida Building Code requires homes to be designed for the wind speeds mapped for their location, and coastal areas have higher requirements. That affects wall reinforcement, roof framing, connectors, sheathing nailing, garage doors and openings. Engineering is site-specific, and inspections verify that the structural elements match the approved plans.
Impact windows and doors
In wind-borne debris regions, openings must be protected either by impact-rated windows and doors or by approved shutters. Most owners choose impact-rated windows and doors because they protect continuously, reduce noise and improve security. Product approvals must match the design pressures on the plans.
Roof systems
Common roof coverings include architectural shingles, concrete or clay tile and standing seam metal. Each has different weight, cost, appearance and maintenance characteristics. Roof installation is performed by a licensed roofing contractor that we coordinate; see roofing and exterior windows.
How are plumbing, electrical and HVAC handled?
Plumbing, electrical and HVAC (often grouped as MEP) are installed by licensed trade contractors under their own permits or under the overall permit, depending on the jurisdiction. As general contractor, DiBe coordinates scope, sequencing and inspections. Under-slab plumbing is installed before the slab pour; rough-ins for plumbing, electrical and ductwork follow dry-in; and fixtures, devices and equipment are set during finishes.
Good MEP coordination matters in Florida because of humidity control, energy code requirements and hurricane considerations. HVAC equipment must be sized properly for the home, and many owners ask about generator connections, whole-home surge protection and additional circuits for future pool equipment or EV charging. Learn more on our MEP coordination page.
What finishes and options should I plan for?
Finish selections drive a large share of the difference in cost between two homes of similar size. We recommend deciding on major selections early because some items have long lead times and others affect rough-in locations.
- Cabinetry style, construction and countertop material for kitchen and baths.
- Flooring type in living areas, bedrooms and wet areas.
- Shower and tub configurations, tile layouts and plumbing fixture finishes.
- Ceiling heights, tray ceilings and interior door heights.
- Lighting plan, ceiling fans and exterior lighting.
- Appliance package and gas versus electric cooking.
- Exterior stucco texture, paint colors and trim details.
- Driveway and walkway materials such as concrete or pavers.
- Lanai size and whether to plan for a pool, screen enclosure or outdoor kitchen.
- Landscaping and irrigation scope.
Planning for outdoor living
Many Southwest Florida homes are designed around the lanai. If a pool or outdoor kitchen is planned now or later, it is easier to plan electrical, plumbing and gas stubs during construction. See outdoor living, pool construction and outdoor kitchens in Cape Coral.
How long does it take to build a new home in Southwest Florida?
Total time is driven by three phases: design and engineering, permitting, and construction. Design time depends on whether you use an existing plan or develop a custom one. Permit review times vary by jurisdiction and season. Construction duration depends on home size, complexity, finish level, weather, inspection availability, material lead times and the speed of owner selections.
Hurricane season, summer rain and post-storm demand for labor and materials can all affect schedules. We provide a projected schedule at contract and update it as the project progresses, so owners and lenders know what to expect. We do not promise fixed completion dates that ignore these realities.
How do construction loans, draws and warranties work?
Many owners finance ground-up homes with a construction loan or construction-to-permanent loan. In general terms, the lender reviews the plans, budget, contract and contractor before closing. Funds are then released in draws tied to completed stages of work, often verified by a lender inspection. The lot may serve as part of the equity in the project.
Lenders have different requirements for contractor documentation, budget format, draw schedules, lien waivers and insurance. We are used to providing organized budgets, schedules of values and draw documentation. Owners should talk to their lender early about requirements and timelines. We do not provide lending or financial advice.
Warranties in general terms
In general terms, new homes typically carry a contractor workmanship warranty for a defined period, along with manufacturer warranties on products such as roofing, windows, appliances and HVAC equipment. Florida law also provides certain statutory rights and notice procedures for construction defects. The specific warranty terms for a project are defined in the construction contract, and we review them with owners before signing so expectations are clear.
Do you build homes for investors and build-to-rent?
Yes. Investors build single-family homes, duplexes and small groups of homes on scattered lots throughout Lehigh Acres, Cape Coral and North Port, either to sell or to hold as rentals. Investor projects benefit from repeatable plans, consistent specifications, efficient scheduling across multiple lots and durable finishes that hold up to tenant turnover.
We can help investors standardize a plan set, price multiple starts and coordinate permitting across lots. For larger portfolios and community-scale projects, see build-to-rent construction and multifamily construction.
Related Services and Areas
Frequently Asked Questions
Can I build on a lot I already own?
Yes. Build-on-your-lot construction is common in Cape Coral, Lehigh Acres and other Southwest Florida areas. We start with a lot evaluation covering zoning, flood zone, utilities, setbacks and fill needs before pricing a home.
Do you build in Cape Coral and Lehigh Acres?
Yes. Both are core markets for our ground-up residential work. See our dedicated pages for new home construction in Cape Coral and Lehigh Acres.
How much does it cost to build a house in Southwest Florida?
Cost depends on home size, design complexity, finish level, site work, fill, utilities, flood elevation, impact fees and roof and window choices. We price each project from plans and a lot evaluation rather than quoting a generic per-square-foot number.
Will my lot need a well and septic system?
It depends on the location. Some areas have city water and sewer at the street; others require a private well and septic system. We confirm this during lot evaluation.
Why do Florida homes use concrete block?
CBS block construction resists wind, moisture and termites well, and it is the standard building method in Southwest Florida, familiar to local engineers, crews and inspectors.
Are impact windows required?
In wind-borne debris regions, openings must be protected by impact-rated products or approved shutters. Most owners choose impact windows and doors.
Who handles plumbing, electrical and HVAC?
Licensed trade contractors perform that work. DiBe coordinates scope, scheduling and inspections as the general contractor.
Can you work with my construction lender?
Yes. We provide budgets, schedules of values and draw documentation in the formats lenders commonly require.
Do you build homes for investors?
Yes. We build single-family homes and duplexes for investors and can standardize plans and specifications across multiple lots.
Can you review a lot before I buy it?
Yes. A pre-purchase lot review can identify site costs and constraints. Our construction consulting service can provide this independently of a build contract.
Ready to build on your lot in Southwest Florida?
Call (239) 414-3423 to schedule a site visit or plan review, or ask about a construction consulting review of your project.